01
Prepare the surface
Use a brush to remove as much dirt, dust and grit as you can from your intended surface, as these can affect the sticking power of the Adjustable Screws.
Tool-free, hassle-free, damage-free mounting on rough surfaces.
Click through the tabs above this step-by-step video to see how quick and easy it is to get your projects – and your possessions – off the ground.
These Adhesive Screws are a super-simple way of mounting a lot of things on rough surfaces. And the best bit is there’s no noise or damage to surfaces. They’ll hold 5kg wherever you want – even outside – and of course two will support twice that weight.
Use a brush to remove as much dirt, dust and grit as you can from your intended surface, as these can affect the sticking power of the Adjustable Screws.
Peel back the foil from the base of the screws to reveal the adhesive rims. Position the screws on a smooth and even spot where you want to mount them, please make sure the spot is smooth and even and then gently press down so that they stick to the surface.
Pierce the nozzle of the adhesive tube with the tool provided and then slip the tool over the other end of the tube.
Poke the nozzle into the larger hole on each screw and apply the adhesive until you see it begin to emerge from the smaller one. There’s no need to press down – just leave the nie wieder bohren. Technology to set for 12 hours or overnight; the moisture in the air reacts with the formula and gives it its sticking power.
Now simply mount the exterior light on the screws. You’re not limited to mounting lights, of course – you can hang pretty much anything you like - a tool rack, for example, or a bracket for a hanging plant.
Removing an Adhesive Screw is really, really simple. We’ve developed nie wieder bohren. Technology to be strong when it comes to load bearing but not when it comes to resisting torsion. Just take an adjustable wrench, get a firm grip on the screw mount, then twist.