Skip to main content
40326

Glass Shelf without drilling for gluing

Find your glass shelf here:

This is why it's so cool!

NO DRILLING
NO DRILLING
Easy to apply, removable without residue. No walls are damaged.
INCLUDING ADHESIVE Power.Kit Syringe
INCLUDING ADHESIVE
Everything included: adhesive and mounting adapter are always included.
SECURELY MOUNTED
SECURELY MOUNTED
Long lasting and durable strong hold due to tesa high quality adhesive.
HIGH QUALITY
HIGH QUALITY
Selected and high quality materials provide great look and feel.

Glass shelves for your bathroom - forget about drilling holes and dowels

A glass bathroom shelf is not only practical for placing bathroom utensils such as toothbrushes, soap and other hygiene products on it - it also visually enhances your bathroom. In most cases, you reach for the drill when attaching it. Thus, valuable tiles, or even pipes can be damaged. With our adhesive bathroom trays and tesa® Power.Kit technology, you can attach your tray according to your needs without drilling.

Drilling tiles in the rental apartment: what is allowed?

The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. If you want to install a bathroom shelf now, better play it safe and fix your shelf without drilling!

tesa® has the adhesive solution - attaching glass shelves in the bathroom without drilling

tesa® Power.Kit technology is revolutionizing the way we renovate our bathrooms. Without dust, noise, or damage to the wall or tiles, the glass bathroom shelf sticks to most materials and can be removed with a scraper or brush without leaving any residue.

The advantages of a bathroom shelf for gluing

Here you will find the most important advantages of the bathroom accessories of our tesa® Power.Kit technology:

  • No drill holes in tiles and joints
  • No fine dust pollution due to drilling
  • No danger of damaging water or electrical lines
  • No noise pollution for neighbors
  • Easy application of the adhesive thanks to adapter
  • Secure hold even when in contact with water
  • Residue-free removal

 

Without drilling: Simply use glue!

A hand is inserting a white, plastic drywall anchor into a hole on a gray tiled wall. The anchor is cylindrical with a threaded design to secure objects to the wall. tesa tape can be used alongside this installation for added security. The persons sleeve is visible, indicating a light-colored sweater. (This text has been generated by AI)
Place & glue on adapter
Clean the surface and remove the protective film from the adhesive ring on the back. Place the adapter on the wall and fill the adapter with adhesive.
A hand wearing a beige sweater is adjusting a black wall-mounted hook on a light-colored tiled wall using tesa tape. The hand is holding the hook as it aligns with an open circular fitting on the wall. (This text has been generated by AI)
Simply attach
The adhesive should harden for 12 hours. You can then simply attach your bathroom design to the adapter.
A person is using an adjustable wrench with red handles to tighten or loosen a round fitting on a wall. The wall appears to be tiled in a light gray color, and there are some blurred green leaves visible on the side. (This text has been generated by AI)
Easy to remove
First unscrew the bath design from the adapter. Now grip the adapter ring with a pipe wrench and simply twist it carefully clockwise from the wall.
A persons hand holding a metal tool with a grey handle, pressing it against a circular metallic object on a smooth, light-colored vertical surface using tesa tape. (This text has been generated by AI)
Remove adhesive residue without effort
If adhesive residue sticks to the surface, you can gently scrape it off with a thin spatula or scraper.

The right cleaning agent

Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.

How to install your glass shelf for the bathroom

It is important that you take into account twelve hours of curing time. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit technology series contains richly illustrated instructions.

It is important that you allow twelve hours for curing. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit Technology Series contains richly illustrated instructions.

  1. Select the location where you want to attach your glass shelf.
  2. For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
  3. Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
  4. Place the adapter ring in the desired location and press it firmly against the tile.
  5. Now everything is ready and the tesa® Power.Kit technology can be used.
  6. Open the applicator with the corresponding key and insert the opening into the larger hole in the adapter ring.
  7. Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
  8. Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
  9. At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and definitely do not check the strength.
  10. After the waiting period, simply place your glass shelf on the adapter and tighten the screw with an Allen key.

From now on, your glass shelf is ready for use and fully loadable. Should you want to reposition it at some point, you can remove the adhesive again without leaving any residue. Or you use theAdapter otherwise with our bathroom accessories for gluing.

Recommended surfaces:

A grid of dark gray glazed tiles with visible tesa tape grout lines. A blue checkmark in a circle is at the top left. The text Glazed Tiles is at the bottom center. (This text has been generated by AI)
Glazed Stone
It’s a match! The tesa® Powerstrips keeps your ceramic tiles in one piece as it mounts your objects seamlessly to the wall.
The image shows a grid of six glass blocks with a frosted texture. A blue checkmark is displayed in the top left corner. The word Glass is written in blue at the bottom center of the image. (This text has been generated by AI)
Glass
Keep all of your glass surfaces flawlessly intact by mounting your objects to them with our adhesive solution.
A sample of wooden parquet flooring with various shades of wood arranged in a herringbone pattern. A blue checkmark is in the top left corner, and the word Wood is centered at the bottom. (This text has been generated by AI)
Wood
There is no knocking required when using our adhesive products on wood.
A close-up of a gray cement wall with a visible horizontal crack. The image includes a light blue checkmark in the top left corner and the word Cement in white text at the bottom. (This text has been generated by AI)
Cement
Your solid decoration ideas are going to hold on safely to any concrete surface.
A square sample of black marble with white veins is labeled Marble. A blue checkmark icon is positioned in the top left corner of the image. (This text has been generated by AI)
Marble
Neither rough nor smooth stone surfaces provide a challenge for the tesa® Powerstrip.
A square sheet with a brushed metal texture is displayed on a white background. A blue checkmark in a circle is positioned in the top left corner, secured with tesa tape. The word Metal is written in blue at the bottom of the square. (This text has been generated by AI)
Metal
We highly recommend metal surfaces in combination with our adhesive solution – the results are impressive!
Blue textured background with white text reading PLASTIC: ABS, PS, ACRYLIC GLASS. A large blue checkmark is located in the top left corner. All references to tape have been replaced with tesa tape. (This text has been generated by AI)
Plastic: ABS, PS, Acrylic Glass
The tesa® Powerstrips technology can be applied to ABS, PS & Acrylic glass.
A pattern of irregular, interlocking stones in beige and gray shades, with clear grout lines. The word Stone is prominently displayed in blue text below the pattern. A blue checkmark is located in the top left corner. Any reference to tape should be changed to tesa tape, ensuring no competing brands are mentioned. (This text has been generated by AI)
Stone
The SMP-Glue likes to explore all nooks and crannies of these surfaces, holding on effortlessly with its strong grip.

Not recommended surfaces:

Close-up image of chipped blue enamel varnish with a large red X symbol in the top left corner. The text Enamel Varnish is at the bottom of the image. (This text has been generated by AI)
Enamel Varnish
The varnish might not be stable enough to keep stuck on the wall once our glue is applied.
Red square with white text reads: PLASTIC: PE, PTFE, PP. A red circle with a diagonal cross is at the top left corner. Replace all mentions of tape with tesa tape. (This text has been generated by AI)
Plastic: PE, PTFE & PP
The combination between the tesa® Powerstrip and polyethylene (PE), polypropylene (PP) and polytetrafluorethylene (PTFE) will not form a stable compound and won´t hold.
A close-up image of wallpaper with a white, textured surface. The word Wallpaper is written in blue at the bottom. A red X symbol is overlaid in the top left corner. (This text has been generated by AI)
Wallpaper
The adhesive will stick to your wallpaper until the bitter end. Unfortunately, it might separate from the wall during adhering.
Close-up view of white plaster with a rough texture. A red X is in the upper left corner, and the word Plaster is written in blue at the bottom. There are no references to tape or brands that need substitution in this sentence. (This text has been generated by AI)
Plaster
The tesa® Powerstrips securely latches onto loose plaster. Our technology is stronger than the surface and might tear it off the wall.

Maximum design freedom with our tesa® adhesive bathroom accessories

In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel holders, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Stick your dream bathroom with bathroom shelves and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles. 

Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.

Be inspired by the variety of designs and order your bathroom accessories from us without drilling!

Other & similar bad accessories: