
This is why it's so cool!
Toilet brush holder for gluing - without drilling.
- Thanks to our innovative fastening system, strong hold is also possible without drilling.
- tesa bathroom accessories hold on most smooth and stable surfaces.
- All products come with the matching adhesive.
No more drill holes: Stick your toilet brush holder to the wall!
If the toilet brush is right next to the toilet, it often gets in the way of cleaning and tips over. With the innovative tesa® Power.Kit technology, it is possible to stick the toilet brush holder directly to the wall. All this without drilling and further manual effort.
Good reasons to opt for gluing instead of drilling
If you drill into tiles or grout, this requires manual skill and effort. Tenants are not allowed to drill into tiles. Water or power lines can easily be damaged, causing major damage. With tesa® Power.Kit technology, you simply stick your toilet brush holder to the desired spot on your wall and remove it again without leaving any residue. You can also find the matching brush for it in our shop.
Without drilling: Simply use glue!
The advantages of a toilet brush set to stick
- Here are the main advantages of our tesa® Power.Kit technology bathroom accessories:
- No drilling holes in tiles and grout lines
- No fine dust pollution due to drilling
- No danger of damaging water or electrical lines
- No noise pollution for neighbors
- Easy application of the adhesive thanks to adapter
- Secure hold even when in contact with water
- Residue-free removal
Many tenants are forbidden to create new drill holes even for all non-essential bathroom accessories, such as hairdryer holders and towel rails. This also includes the toilet brush with holder. Thanks to the new series from tesa®, you don't have to do without it.
Recommended surfaces:
Not recommended surfaces:
Important: Before you start working, the surface must be thoroughly cleaned.
The right cleaning agents
Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.
How to attach the toilet brush holder without drilling
It is important that you take into account twelve hours of curing time. That's why we recommend starting installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit Technology Series contains richly illustrated instructions.
This is how you start step by step:
- select the location where you want to attach your new toilet brush holder.
- For the tesa® Power.Kit technology to develop its full holding power, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
- Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
- place the adapter ring in the desired location and press it firmly to the tile.
- now everything is ready and the tesa® Power.Kit technology can be used.
- Open the tube with the tube wrench and insert the opening into the larger hole in the adapter ring.
- Press adhesive into the adapter using the wrench until some adhesive comes out on the smaller opening of the adapter.
- now the back of the adapter is completely filled with adhesive and creates a secure connection with the tile surface.
- at this point you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and in any case do not check the strength.
- After the waiting time, simply place your toilet brush holder on the adapter and tighten the screw with an Allen wrench. From now on, you can aesthetically store your toilet brush!
Should you want to exchange your toilet brush holder at some point, you can remove the adhesive again without leaving any residue. Or you can use the adapter elsewhere, such as with a replacement roll holder.
More questions about toilet brush holder for gluing
tesa® Power.Kit technology offers you numerous advantages, but may also raise questions. Here you will find the most important answers.
Is the adhesive toxic?
Of course, you should not eat it or rub it into your eyes. However, pure skin contact and inhalation of the vapors released when filling the glue is completely safe.
How long does the adhesive last?
Theoretically, it will outlive you, because it is rot-proof and water-resistant. If you want to remodel your bathroom or guest WC, you can still remove your toilet brush holder specifically and easily remove the adhesive residue with a ceramic hob cleaner.
Maximum design freedom with our tesa® adhesive bathroom accessories
Stick your dream bathroom with the brush holders and other bathroom accessories from tesa®. No more tools, no more drilling, and no more ugly holes in walls and tiles. You also no longer have to watch out for power lines or water pipes, as you can simply stick your brush holders and other accessories where you need them and then remove them again without leaving any residue.
Test the brush holder for sticking in your bathroom and discover many other attractive accessories from the new series of tesa® Power.Kit technology!