Skip to main content
40301

Toilet Paper Holder without drilling for gluing

Find your toilet paper holder here:

This is why it's so cool!

INCLUDING ADHESIVE Power.Kit Syringe
INCLUDING ADHESIVE
Everything included: adhesive and mounting adapter are always included.
SECURELY MOUNTED
SECURELY MOUNTED
Long lasting and durable strong hold due to tesa high quality adhesive.
NO DRILLING
NO DRILLING
Easy to apply, removable without residue. No walls are damaged.
HIGH QUALITY
HIGH QUALITY
Selected and high quality materials provide great look and feel.

Toilet paper holder for gluing. Easy to attach without drilling.

For various reasons, drilling in the bathroom is not always possible or wanted. With tesa® Power.Kit technology, we have the solution to your problem. Our adhesive toilet roll holders are easy to attach and remove without leaving any residue.

Benefit from the many advantages of our tesa® Power.Kit technology:

  • You do not damage walls and tiles by drilling.
  • You do not need to worry about water pipes and power lines.
  • Drilling equipment and manual dexterity are not necessary.
  • Adhesive and mounting adapter are included with each toilet paper holder.
  • You do not need any consent from your landlord.
  • Our toilet paper holders can be positioned to suit your needs.
  • Sticks permanently to most surfaces.
  • Very high resilience due to tesa® Power.Kit technology.
  • The roll holders can be removed without leaving any residue and reattached if desired (new adapter kit required).

The roll holders can be removed without leaving any residue and reattached if desired (new adapter kit required).

 

Without drilling: Simply use glue!

A hand is inserting a white, plastic drywall anchor into a hole on a gray tiled wall. The anchor is cylindrical with a threaded design to secure objects to the wall. tesa tape can be used alongside this installation for added security. The persons sleeve is visible, indicating a light-colored sweater. (This text has been generated by AI)
Place & glue on adapter
Clean the surface and remove the protective film from the adhesive ring on the back. Place the adapter on the wall and fill the adapter with adhesive.
A hand wearing a beige sweater is adjusting a black wall-mounted hook on a light-colored tiled wall using tesa tape. The hand is holding the hook as it aligns with an open circular fitting on the wall. (This text has been generated by AI)
Simply attach
The adhesive should harden for 12 hours. You can then simply attach your bathroom design to the adapter.
A person is using an adjustable wrench with red handles to tighten or loosen a round fitting on a wall. The wall appears to be tiled in a light gray color, and there are some blurred green leaves visible on the side. (This text has been generated by AI)
Easy to remove
First unscrew the bath design from the adapter. Now grip the adapter ring with a pipe wrench and simply twist it carefully clockwise from the wall.
A persons hand holding a metal tool with a grey handle, pressing it against a circular metallic object on a smooth, light-colored vertical surface using tesa tape. (This text has been generated by AI)
Remove adhesive residue without effort
If adhesive residue sticks to the surface, you can gently scrape it off with a thin spatula or scraper.

Recommended surfaces:

A grid of dark gray glazed tiles with visible tesa tape grout lines. A blue checkmark in a circle is at the top left. The text Glazed Tiles is at the bottom center. (This text has been generated by AI)
Glazed Stone
It’s a match! The tesa® Powerstrips keeps your ceramic tiles in one piece as it mounts your objects seamlessly to the wall.
The image shows a grid of six glass blocks with a frosted texture. A blue checkmark is displayed in the top left corner. The word Glass is written in blue at the bottom center of the image. (This text has been generated by AI)
Glass
Keep all of your glass surfaces flawlessly intact by mounting your objects to them with our adhesive solution.
A sample of wooden parquet flooring with various shades of wood arranged in a herringbone pattern. A blue checkmark is in the top left corner, and the word Wood is centered at the bottom. (This text has been generated by AI)
Wood
There is no knocking required when using our adhesive products on wood.
A close-up of a gray cement wall with a visible horizontal crack. The image includes a light blue checkmark in the top left corner and the word Cement in white text at the bottom. (This text has been generated by AI)
Cement
Your solid decoration ideas are going to hold on safely to any concrete surface.
A square sample of black marble with white veins is labeled Marble. A blue checkmark icon is positioned in the top left corner of the image. (This text has been generated by AI)
Marble
Neither rough nor smooth stone surfaces provide a challenge for the tesa® Powerstrip.
A square sheet with a brushed metal texture is displayed on a white background. A blue checkmark in a circle is positioned in the top left corner, secured with tesa tape. The word Metal is written in blue at the bottom of the square. (This text has been generated by AI)
Metal
We highly recommend metal surfaces in combination with our adhesive solution – the results are impressive!
Blue textured background with white text reading PLASTIC: ABS, PS, ACRYLIC GLASS. A large blue checkmark is located in the top left corner. All references to tape have been replaced with tesa tape. (This text has been generated by AI)
Plastic: ABS, PS, Acrylic Glass
The tesa® Powerstrips technology can be applied to ABS, PS & Acrylic glass.
A pattern of irregular, interlocking stones in beige and gray shades, with clear grout lines. The word Stone is prominently displayed in blue text below the pattern. A blue checkmark is located in the top left corner. Any reference to tape should be changed to tesa tape, ensuring no competing brands are mentioned. (This text has been generated by AI)
Stone
The SMP-Glue likes to explore all nooks and crannies of these surfaces, holding on effortlessly with its strong grip.

Not recommended surfaces:

Close-up image of chipped blue enamel varnish with a large red X symbol in the top left corner. The text Enamel Varnish is at the bottom of the image. (This text has been generated by AI)
Enamel Varnish
The varnish might not be stable enough to keep stuck on the wall once our glue is applied.
Red square with white text reads: PLASTIC: PE, PTFE, PP. A red circle with a diagonal cross is at the top left corner. Replace all mentions of tape with tesa tape. (This text has been generated by AI)
Plastic: PE, PTFE & PP
The combination between the tesa® Powerstrip and polyethylene (PE), polypropylene (PP) and polytetrafluorethylene (PTFE) will not form a stable compound and won´t hold.
A close-up image of wallpaper with a white, textured surface. The word Wallpaper is written in blue at the bottom. A red X symbol is overlaid in the top left corner. (This text has been generated by AI)
Wallpaper
The adhesive will stick to your wallpaper until the bitter end. Unfortunately, it might separate from the wall during adhering.
Close-up view of white plaster with a rough texture. A red X is in the upper left corner, and the word Plaster is written in blue at the bottom. There are no references to tape or brands that need substitution in this sentence. (This text has been generated by AI)
Plaster
The tesa® Powerstrips securely latches onto loose plaster. Our technology is stronger than the surface and might tear it off the wall.

How firmly does a toilet paper holder with tesa® Power.Kit technology hold?

The holding power of the tesa® Power.Kit technology is up to six kilograms for the toilet paper holders. By comparison, a roll of toilet paper weighs about 120 grams.

Can the roll holders be placed elsewhere again?

Yes! The toilet roll holders with Power.Kit technology can be easily removed without leaving any residue and without damaging the wall or the holder. So you can easily reattach the roll holder to another place. To do this, you only need to buy the adapter kit again. You can find the right adapters via our adapter finder.

By the way: Our towel hooks for gluing are ideal for door mounting, especially in small bathrooms in rented apartments, as they can also be removed again without leaving any residue or damage.

Where in the bathroom should you place the roll holder?

Simply place the roll holder where it is convenient for you to reach from the toilet! The toilet paper holder should be easily accessible without stretching, turning or standing up.common mounting height is 75 to 95 centimeters. The optimal distance to the side is about 45 centimeters.

For all-round perfect ergonomics and coordinated design, we also recommend a look at our replacement roll holder for gluing and toilet brush holder without drilling.

Which toilet paper holder fits my bathroom?

Here it depends entirely on your own personal taste. Differences to the design you can see here in a short overview:

Toilet paper holder with lid

The roll holder with lid looks especially hygienic, because the toilet rolls are covered. Another advantage is that toilet roll holder with lid is better to use with one hand. The light pressure of the weight of the lid makes it easy to tear off the sheets. This is especially good for longer distances from the wall, because you do not have to reach around with one arm. The toilet roll also does not unintentionally unroll far than desired with toilet paper holder with lid.

Toilet paper holder with shelf

The possibilities of how you can use a shelf within easy reach of the toilet seat are endless. Typical use cases for toilet paper holder with shelf are other hygiene items such as wet wipes or disinfectant spray. Small plants are also very popular here. The storage surface is also often used for entertainment media such as the cell phone or a book.

This roll holder is not recommended as a storage surface for spare rolls. The spare roll can fall down. Use our replacement roll holders for gluing.

Toilet paper holder without shelf and lid

The practical advantage of toilet roll holder without a lid or shelf is mainly its shallow depth. This makes it particularly suitable for narrow places. A clear view of the roll stand can also have a calming effect.

tesa toilet paper holder for gluing without drilling fastening

To ensure that the tesa® Power.Kit technology can develop its full adhesive performance, we have summarized the most important instructions for you on this page. If you follow the assembly instructions, you will have a lot of fun with your new tesa® adhesive toilet paper holder. We promise you that!

  1. Clean the surface very thoroughly: Once you have found the suitable place for mounting the toilet paper holder, you should clean this area intensively. Only on surfaces that are free of dust, grease, lime and dry will the combination of adhesive mass and adapter achieve maximum holding power. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If you want to be on the safe side, wipe the area again with a dry, soft and clean cloth.
  2. Stick the adapter to the wall: First remove the protective film of the adhesive ring. Press the adapter firmly to the surface for a few seconds. Be careful not to touch the adhesive surface of the adapter with your fingers. Otherwise, new grease could get onto the surface and reduce the load-bearing capacity.
  3. Fill the adapter with the adhesive: Place the wing of the applicator on the applicator. Open the applicator at its tip with a twisting motion. Now hold the applicator in the larger opening of the adapter. Now carefully squeeze the adhesive out of the applicator and fill the ring with the adhesive until it appears at the smaller hole of the adapter. Important: Please do not press or touch the adapter now! This could create cavities that impair the holding force.
  4. Allow the adhesive to cure and mount the toilet paper holder: To ensure maximum holding force, please wait 12 hours. Then the adhesive will be completely cured. If adhesive mass protrudes from the sides of the adapter, you can carefully remove it. Now attach the toilet paper holder to the adapter. For most product groups, the enclosed Allen key will help you to do this.

Other & similar bad accessories: