Towel Ring without drilling for gluing

Simply stick your towel ring to the wall!

A towel ring is exposed to some weight and must therefore be very stable. Unfortunately, attaching it with a screw and dowel is often complicated. Craftsmanship and the necessary tools are required here. With tesa® Power.Kit technology, you simply stick your desired ring to the wall and remove it again without leaving any residue. Without leaving any unsightly drill holes.

Drilling tiles in the rented flat: what is allowed? 

The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. If you now want to attach a towel ring to your wall, it is better to play it safe and attach it without drilling!

tesa® has the adhesive solution - attaching towel rings to the wall without drilling

tesa® Power.Kit technology is revolutionising the way we renovate our bathrooms. Without any dust, noise, or damage to your bathroom, the towel ring sticks to most materials, can be removed without leaving any residue, and can then be reattached.

The advantages of a towel ring for gluing

 Here are the most important advantages of the bathroom accessories of our tesa® Power.Kit technology:

• No drilling holes in tiles and joints
• No fine dust pollution from drilling
• No danger of damaging water or electrical pipes
• No noise pollution for neighbours
• Easy application of the adhesive thanks to the adapter
• Secure hold even when in contact with water
• Residue-free removal

Adhesive towel rings - these surfaces are suitable 

Your tesa® towel ring will stick to most materials. Please refer to the table to find out whether the adhesive solution will adhere in your bathroom!

The tesa® products for gluing consist of three components. The following components are included in each set:

• tesa® Power.Kit technology (waterproof and removable without leaving residue).
• Adapter as a base for the desired accessory such as a towel ring
• Desired bathroom accessory
• Applicator key to press the adhesive evenly and completely out of the applicator.

The right cleaning product

Do not clean the surface with the usual bathroom cleaning agents, but use rubbing alcohol instead.

To attach your towel ring to the wall

It is important that you allow twelve hours for curing. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each pack of the tesa® Power.Kit Technology Series contains richly illustrated instructions.

1. Select the place where you would like to attach the ring.
2. For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, lime and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
3. Take the adapter ring out of the package and remove the foil from the adhesive surface on the back.
4. Place the adapter ring in the desired position and press it firmly against the tile.
5. Now everything is ready and the tesa® Power.Kit technology can be used.
6. Open the applicator with the key and insert the hole into the larger hole in the adapter ring.
7. Press the adhesive into the adapter using the key until some adhesive comes out on the smaller opening of the adapter.
8. Now the back of the adapter is completely filled with glue and creates a secure connection with the tile surface.
9. At this point you need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and do not check the strength under any circumstances.
10. After the waiting time, simply place your towel ring on the adapter and tighten the screw with an Allen key.

From now on, the towel ring is ready for use and fully loadable. If you want to reposition it at some point, you can remove the adhesive without leaving any residue using a scraper or brush. Or you can use the adapter in another way with our bathroom accessories for gluing.

Maximum design freedom with our tesa® adhesive bathroom accessories

In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel rails, shower squeegees, toilet paper holders, soap dispensers, and numerous other products. Stick your dream bathroom with the towel rings and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles. 

Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.

Be inspired by the variety of designs and order your bathroom accessories from us without drilling!