
This is why it's so cool!
Mount without drilling: Simply stick your shower head holder!
You need a shower head bracket for your shower head but the assembly with screws and dowels is too time-consuming for you? That is understandable. Craftsmanship and the necessary tools are needed here. Valuable tiles or even pipes can be damaged in the process. With our adhesive shower holders and tesa® Power.Kit technology, you can install your holder according to your needs without drilling.
Drilling tiles in the rental apartment: what is allowed?
The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. Now, if you want to attach a shower head holder, better play it safe and attach it without drilling!
tesa® has the adhesive solution - attach shower head holder in bathroom without drilling
tesa® Power.Kit technology is revolutionizing the way we renovate our bathrooms. Without any dust, noise, or damage to your shower stall, the bracket sticks to most materials and can be removed and then reattached without leaving any residue.
The advantages of a shower head holder for gluing
- No drill holes in tiles and joints
- No fine dust pollution due to drilling
- No danger of damaging water or electrical lines
- No noise pollution for neighbors
- Easy application of the adhesive thanks to adapter
- Secure hold even when in contact with water
- Residue-free removal
The right cleaning agent
Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.
How to install your shower bracket in the bathroom
It is important that you take into account twelve hours of curing time. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit Technology Series contains richly illustrated instructions.
- Select the location where you want to attach your shower head holder.
- For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
- Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
- Place the adapter ring in the desired location and press it firmly against the tile.
- Now everything is ready and the tesa® Power.Kit technology can be used.
- Open the applicator with the corresponding key and insert the opening into the larger hole in the adapter ring.
- Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
- Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
- At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and definitely do not check the strength.
- After the waiting period, simply place your shower bracket on the adapter and tighten the screw with an Allen key.
From now on, your shower head holder is ready for use and fully loadable. Should you want to reposition it at some point, you can remove the adhesive again without leaving any residue using a scraper or brush. Or you can use the adapter elsewhere with our bathroom accessories for gluing.
Without drilling: Simply use glue!
Shower head holder without drilling - suitable for these materials
To mount the holder in the shower, most common shower surfaces such as tiles, marble or glass are suitable. Please refer to the table to see if the adhesive solution adheres to your material!
Recommended surfaces:
Not recommended surfaces:
Maximum design freedom with our tesa® adhesive bathroom accessories
In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel holders, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Stick your dream bathroom with shower head holders and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles.
Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.
Be inspired by the variety of designs and order your bathroom accessories from us without drilling!