01
Clean the surfaces
Use a brush to scrub away any grit or dirt on the brickwork. If the object you’re mounting needs cleaning too, make sure you use a silicone-free detergent (silicon’s the enemy of adhesion because it’s non-stick).
Fast, reliable and permanent mounting on rough and solid surfaces - even outdoors.
Click through the tabs above this step-by-step video to see how quick and easy it is to get your projects – and your possessions – off the ground.
It’s resistant to humidity, temperature from -10°C to +40°C and, UV radiation. So if you want a fast, easy and permanent solution to mounting something on brickwork or similarly rough surfaces like brickwork, tiles, glass, wood, stone or concrete then look no further.
Use a brush to scrub away any grit or dirt on the brickwork. If the object you’re mounting needs cleaning too, make sure you use a silicone-free detergent (silicon’s the enemy of adhesion because it’s non-stick).
Cut the Mounting Tape into the appropriate length(s) and apply them vertically to object. (Since the load will be greater towards the top of the hanging surface, ensure you use more tape on this area.)
Press or rub firmly along the back of each section of Mounting Tape for at least 5 seconds.
All that remains to be done is to peel off the protective foil, align the mailbox / house number and press it to the brickwork. Now apply pressure over the entirety of the object’s surface for at least five seconds to complete the bonding process.