tesa® 4943

Double-sided non woven tape with acrylic adhesive

Product Construction

Backing material non-woven
Colour translucent
Colour of liner white
Thickness of liner 120 µm
Total thickness 100 µm
Type of adhesive type: tackified acrylic
Type of adhesive (covered side) tackified acrylic
Type of liner type: PE-coated paper

Properties / Performance Values

Elongation at break 2 %
Tensile strength 9 N/cm
Ageing resistance (UV) good
Static shear resistance at 23°C good
Tack good
Temperature resistance short term duration 100 °C
Humidity resistance good
Chemical resistance medium
Static shear resistance at 70°C good
Fogging good
Temperature resistance long term duration 70 °C
Static shear resistance at 40°C medium

Adhesion to Values

Adhesion to ABS (initial) 6.6 N/cm
Adhesion to ABS (after 14 days) 7.1 N/cm
Adhesion to Aluminium (initial) 3.6 N/cm
Adhesion to Aluminium (after 14 days) 4.2 N/cm
Adhesion to PC (initial) 7.7 N/cm
Adhesion to PC (after 14 days) 7.1 N/cm
Adhesion to PET (initial) 4.6 N/cm
Adhesion to PET (after 14 days) 5.4 N/cm
Adhesion to PS (initial) 6.9 N/cm
Adhesion to PVC (initial) 6.1 N/cm
Adhesion to PVC (after 14 days) 10.8 N/cm
Adhesion to Steel (initial) 5.5 N/cm
Adhesion to Steel (after 14 days) 8.1 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products