Find your toothbrush cup holder here:
4 reasons why tesa® works so well:
tesa® toothbrush cup with holder for gluing
A toothbrush cup with a holder saves space in your bathroom, won’t tip over, and makes cleaning bathroom shelves easier. Until now, however, installation has been complicated. Manual skill and the necessary tools were required. Valuable tiles or even pipes can quickly be damaged by drilling. With our adhesive cup holders and tesa® Power.Kit technology, you can mount your toothbrush cup to suit your needs without drilling and remove it again without leaving any residue.
Drilling into tiles in a rental apartment: what is allowed?
The legal situation is clear when it comes to drilling holes into the landlord’s property. As long as there are enough towel holders, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill additional holes. In particular, you must not drill into tiles at all. If you now want to attach a cup holder, play it safe and fasten it without drilling!
tesa® has the adhesive solution – install a cup holder in the bathroom without drilling
tesa® Power.Kit technology revolutionises the way we renovate our bathrooms. Completely without dust, noise, or damage in your bathroom, the holder adheres to most materials and can be removed without leaving any residue and then reattached.
The advantages of a toothbrush cup with an adhesive holder
Here you’ll find the key advantages of bathroom accessories with our tesa® Power.Kit technology:
- No drill holes in tiles and grout
- No fine dust exposure from drilling
- No risk of damaging water or electrical lines
- No noise nuisance for neighbours
- Super-easy application of the adhesive thanks to the adapter
- Secure hold even when in contact with water
- Residue-free removal
No drilling: Simply stick it on!
Recommended surfaces:
Not recommended surfaces:
The right cleaning agent
Do not clean the surface with standard bathroom cleaners; use rubbing alcohol instead.
How to install your toothbrush cup in the bathroom
It is important that you allow for twelve hours of curing time. That’s why we recommend starting the installation in the evening and continuing the next morning. In addition, every pack in the tesa® Power.Kit Technology series includes richly illustrated instructions.
- Choose the spot where you want to attach your cup holder.
- For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, limescale, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use non-stick cleaners or silicone-based cleaners, as these substances impair adhesion. After basic cleaning, clean again with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
- Take the adapter ring out of the package and remove the film from the adhesive surface on the back.
- Place the adapter ring in the desired position and press it firmly onto the tile.
- Now everything is prepared and the tesa® Power.Kit Technology can be used.
- Open the applicator with the corresponding key and insert the opening into the larger hole in the adapter ring.
- Using the key, press adhesive into the adapter until a little adhesive comes out of the adapter’s smaller opening.
- Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
- At this point you need patience. The adhesive must cure for twelve hours. Do not touch the adapter during this time and do not check its strength under any circumstances.
- After the waiting time, simply place your cup holder onto the adapter, tighten the screw with an Allen key, and insert the cup.
From now on, the holder is ready for use and can bear full loads. If you ever want to reposition it, you can remove the adhesive again without leaving any residue using a scraper or a brush. Or you can use the adapter elsewhere with our bathroom accessories for gluing.
Maximum design freedom with our tesa® bathroom accessories for gluing
In the tesa® Power.Kit Technology series, you’ll find the right adapter for every need, which can be mounted in the bathroom without drilling. Discover towel holders, shower squeegees, toilet roll holders as well as soap dispensers and numerous other products. Create your dream bathroom with toothbrush cup holders and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles.
Tip: tesa®’s adhesive solution is also available for other rooms in the house, by the way.
Be inspired by the variety of designs and order your bathroom accessories from us without drilling!