A person is installing a black wall-mounted holder onto a beige tiled wall. The holder is circular, and the persons hand is seen adjusting it, aligning it with the mounting fixture using tesa tape.

Installation instructions for tesa® Power.Kit Technology

It’s that easy to enjoy all the benefits of tesa® Power.Kit Technology
No drill holes, no noise, no dirt, enormous holding power, and residue-free removal – many arguments speak in favour of using our revolutionary adhesive solution.

So that tesa® Power.Kit Technology can deliver its full adhesive performance, we have summarised the most important tips on this page for you.

Recommended surfaces:

A close-up of a gray cement wall with a visible horizontal crack. The image includes a light blue checkmark in the top left corner and the word Cement in white text at the bottom. (This text has been generated by AI)
Cement
Your sturdy decorating ideas will hold securely on any concrete surface.
The image shows a grid of six glass blocks with a frosted texture. A blue checkmark is displayed in the top left corner. The word Glass is written in blue at the bottom center of the image. (This text has been generated by AI)
Glass
Keep all your glass surfaces flawlessly intact by attaching your items to them with our adhesive solution.
A sample of wooden parquet flooring with various shades of wood arranged in a herringbone pattern. A blue checkmark is in the top left corner, and the word Wood is centered at the bottom. (This text has been generated by AI)
Wood
When using our adhesive products on wood, the surface simply needs to be clean, according to the installation instructions.
A pattern of irregular, interlocking stones in beige and gray shades, with clear grout lines. The word Stone is prominently displayed in blue text below the pattern. A blue checkmark is located in the top left corner. Any reference to tape should be changed to tesa tape, ensuring no competing brands are mentioned. (This text has been generated by AI)
Stone
The SMP adhesive loves to explore every nook and cranny of these surfaces and holds on effortlessly with its strong adhesion.
A square sample of black marble with white veins is labeled Marble. A blue checkmark icon is positioned in the top left corner of the image. (This text has been generated by AI)
Marble
Neither rough nor smooth stone surfaces pose a challenge for the tesa® Power.Kit.
Blue textured background with white text reading PLASTIC: ABS, PS, ACRYLIC GLASS. A large blue checkmark is located in the top left corner. All references to tape have been replaced with tesa tape. (This text has been generated by AI)
Plastic: ABS, PS, Acrylic Glass
With the exception of plastics based on polyethylene, polypropylene, and PTFE, tesa® Power.Kit technology can be used on synthetic surfaces.
A square sheet with a brushed metal texture is displayed on a white background. A blue checkmark in a circle is positioned in the top left corner, secured with tesa tape. The word Metal is written in blue at the bottom of the square. (This text has been generated by AI)
Metal
We strongly recommend using our adhesive solution in combination with metal surfaces—the results are impressive!
A grid of dark gray glazed tiles with visible tesa tape grout lines. A blue checkmark in a circle is at the top left. The text Glazed Tiles is at the bottom center. (This text has been generated by AI)
Glazed Stone
It fits perfectly! The tesa® Power.Kit keeps your ceramic tiles intact while seamlessly attaching your items to the wall.

Surfaces not recommended:

A close-up image of wallpaper with a white, textured surface. The word Wallpaper is written in blue at the bottom. A red X symbol is overlaid in the top left corner. (This text has been generated by AI)
Wallpaper
The adhesive will stick to your wallpaper, but it will do so to the bitter end, because the adhesive specially used here for wet rooms is too strong for your wallpaper and may tear it off.
Close-up view of white plaster with a rough texture. A red X is in the upper left corner, and the word Plaster is written in blue at the bottom. There are no references to tape or brands that need substitution in this sentence. (This text has been generated by AI)
Plaster
The tesa® Power.Kit will stick to loose plaster. Our technology is stronger than the surface and can tear it off the wall.
Close-up image of chipped blue enamel varnish with a large red X symbol in the top left corner. The text Enamel Varnish is at the bottom of the image. (This text has been generated by AI)
Enamel Varnish
The paint may not be stable enough to remain adhered to the wall once our adhesive is applied.
Red square with white text reads: PLASTIC: PE, PTFE, PP. A red circle with a diagonal cross is at the top left corner. Replace all mentions of tape with tesa tape. (This text has been generated by AI)
Plastic: PE, PTFE & PP
The combination of the tesa® Power.Kit adhesive and polyethylene (PE), polypropylene (PP), and polytetrafluoroethylene (PTFE) does not form a stable bond and will not hold.

Easy application and removal in six steps

Note: Please be sure to also read the installation instructions included in the respective product packaging. In individual cases, there may be slight differences in installation.

EASY-ON – easy installation:

Illustration showing a hand wiping a tiled wall with a cloth. A bottle labeled Alcohol is shown in a circle to the left, suggesting the use of alcohol for cleaning the surface. (This text has been generated by AI)

01Clean the surface very thoroughly

Once you have found the right place for installation, you should clean this area thoroughly. Only on surfaces that are dust-free, grease-free, limescale-free, and dry will the combination of adhesive mass and adapter achieve maximum holding power.

For basic cleaning, use a clean, soft cloth. Please do not use any non-stick cleaning agent or silicone-based cleaners, as these substances impair the adhesive effect. After basic cleaning, clean again with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.

If you want to be on the safe side, wipe the area once more with a dry, soft, clean cloth.

Illustration shows two hands holding a circular, silver object with a beige center and three holes. A small, semicircular tesa tape sticker is being peeled off the objects edge. The background features white, square tiles. A number 2 is in the top left corner. (This text has been generated by AI)

02Stick the adapter to the wall

In our range you will find various adapters for properly mounting bathroom accessories. They are used, among other things, to secure toilet roll holders, toilet brush sets, towel hooks, and soap dispensers.

All adapters are similar in design and work according to the same principle: First remove the protective film from the adhesive ring. Press the adapter firmly onto the surface for a few seconds. If you are mounting a bathroom accessory with two adapters, make sure that the distance between the adapters is correct and that they are properly aligned.

Info: Be careful not to touch the adhesive surface of the adapter with your fingers. Otherwise, new grease could get onto the surface and reduce the load-bearing capacity.

Illustration of a hand using a tool to remove a circular metallic fixture from a tiled wall. The fixture has a hole with an arrow pointing left, and the tool is being inserted into the fixture using tesa tape for securing. (This text has been generated by AI)

03Fill the adapter with the adhesive

Now hold the applicator in the larger opening of the adapter. Then carefully squeeze the adhesive out of the applicator and fill the ring with the adhesive compound until it appears at the smaller hole of the adapter.

Important: Please do not press or touch the adapter any more now! Voids could form that impair the holding power.

Illustration showing a wall-mounted round device with a metallic edge and two visible screws. A clock symbol with 12h in the center is positioned to the left, surrounded by an arrow. A gray number 4 is in the top-left corner, secured using tesa tape. (This text has been generated by AI)

04Let the adhesive cure

To ensure maximum holding power, please wait 12 hours. Then the adhesive will be completely cured.

If adhesive compound protrudes from the sides of the adapter, you can carefully remove it. 

Illustration showing a hand using a screwdriver to tighten a set screw on a metal bathroom fixture mounted on white tiled wall. A number 6 is in the top left corner, indicating the step in a sequence. (This text has been generated by AI)

05Install the bathroom accessory

Now attach the bathroom accessory to the adapter. For most product groups, the included Allen key will help you with this .

EASY-OFF

An adjustable wrench is being used to turn a round metal object, possibly a plumbing fixture. Two red arrows indicate a counterclockwise rotation. The background shows a tiled surface. (This text has been generated by AI)

01Remove the accessory

Removing the adhesive adapter is just as easy as installing it! First, unscrew the bathroom accessory from the adapter. Now grip the adapter ring with a pipe wrench and simply turn it clockwise carefully off the wall

A hand holds a caulking tool applying a bead of white caulk to a white tiled surface. The tool is positioned at an angle, and the tiles have visible grout lines. A number 2 is in the upper left corner, and tesa tape is used to achieve clean edges. (This text has been generated by AI)

02Remove adhesive residue effortlessly

If adhesive residue remains stuck to the surface, you can carefully scrape it off with a thin spatula or a scraper.

Illustration of a rectangular area with a light gray border labeled tesa tape at the top left. The interior displays a grid of white squares resembling tiles with a blue starburst pattern in the center, suggesting a shiny or reflective surface. (This text has been generated by AI)

03Done!

Voila! Your tiles are as clean as before and undamaged.


Note: You don’t have to dispose of the bathroom accessory; you can reuse it with a new adapter. So it’s ideal if you want to redecorate your bathroom!

Pictures are boring? Watch our video tutorial...

tesa Bath Power.Kit technology

This video tutorial applies to all bathroom accessories that are installed with our Power.Kit technology.

Do you need a new Power.Kit adapter?

Not sure which adapter you need?

A woman in a white t-shirt and jeans holds a large white speech bubble. Inside the bubble are images of a door lock mechanism and a knob, along with references to using tesa tape for installation. She has a thoughtful expression and stands against a plain white background. (This text has been generated by AI)

Power.Kit adapters & adhesives

Easily find the right Power.Kit adapter with our clear tables.

Unfortunately, there isn’t one adapter that fits all. That’s why we created an overview of which adapter fits which product.

EVERYTHING TOO COMPLICATED? OUR INTERACTIVE ADVISOR CAN HELP YOU IN NO TIME!

Questions about tesa Power.Kit technology:

A woman in a pink shirt is arranging frames on a grey and white wall, filled with various artwork and photos, using tesa tape. The room has a modern design with a small kitchen on the left, light wood flooring, and green plants for decoration. (This text has been generated by AI)

Do you need help?

Do you have a question, your delivery wasn’t complete, or something got broken?

On the following page you’ll find the right form for your request, and a tesa® employee will get back to you very shortly.
Last updated on 17 Nov 2026