Find your soap dish here:
4 reasons why tesa® works so well:
Soap dish for your bathroom - forget drill holes and wall plugs
A soap dish on the wall next to your sink or in the shower saves space and is very practical, as you can place the soap within easy reach wherever you like. In most cases, people reach for a drill for installation. This can damage valuable tiles or even pipes. With our adhesive soap dishes and tesa® Power.Kit Technology, you can attach your holders according to your needs without drilling.
Drilling into tiles in a rented flat: what is allowed?
The legal situation is clear when it comes to drilling holes into the landlord's property. As long as there are enough towel holders, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill additional holes. In particular, you must not drill into tiles at all. If you now want to install a soap dish, it's better to play it safe and attach it without drilling!
tesa® has the adhesive solution – install soap dishes in the bathroom and shower without drilling
tesa® Power.Kit Technology revolutionises the way we renovate our bathroom. With no dust, noise, or damage to the wall or tiles, the soap dish sticks to most materials and can be removed again without residue using a scraper or a brush.
The advantages of an adhesive soap dish
Here you will find the most important advantages of the bathroom accessories with our tesa® Power.Kit Technology:
- No drill holes in tiles and grout
- No fine dust exposure from drilling
- No risk of damaging water or electrical lines
- No noise nuisance for the neighbours
- Child’s-play application of the adhesive thanks to the adapter
- Secure hold even when in contact with water
- Removes without leaving residue
The right cleaning agent
Do not clean the surface with the usual bathroom cleaners; instead, use rubbing alcohol. That makes it much easier when you can simply stick your new soap holder for the shower or at the sink right onto the wall. It’s child’s play and happens without any noise or mess.
How to attach your soap holder to the wall or in the shower
It’s important that you allow for twelve hours of curing time. That’s why we recommend starting the installation in the evening and continuing the next morning. In addition, every pack in the tesa® Power.Kit Technology series includes richly illustrated instructions.
- Choose the spot where you want to attach your soap holder.
- For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, limescale, and other residues. For basic cleaning, use a clean, soft cloth. Please do not use non-stick cleaning agents or silicone-containing cleaners, as these substances impair the adhesive effect. After basic cleaning, clean again with rubbing alcohol. If a cleaning wipe is included with your accessory, please use it.
- Take the adapter ring out of the package and remove the film from the adhesive surface on the back.
- Place the adapter ring in the desired position and press it firmly onto the tile.
- Now everything is prepared and the tesa® Power.Kit Technology can be used.
- Open the applicator with the supplied key and insert the opening into the larger hole in the adapter ring.
- Using the key, press adhesive into the adapter until some adhesive comes out of the adapter’s smaller opening.
- Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
- At this point you need patience. The adhesive must cure for twelve hours. Do not touch the adapter during this time and do not check its stability under any circumstances.
- After the waiting time, simply place your holder onto the adapter and tighten the screw with an Allen key.
From now on, your soap holder is ready for use and can be fully loaded. If you ever want to reposition it, you can remove the adhesive again without leaving residue. Or use the adapter elsewhere with our bathroom accessories for sticking.
Recommended surfaces:
Surfaces not recommended:
Maximum design freedom with our tesa® bathroom accessories for gluing
In the tesa® Power.Kit Technology series, you’ll find the right adapter for every requirement, which can be mounted in the bathroom without drilling. Discover towel holders, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Create your dream bathroom with our soap dishes and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles.
Tip: By the way, tesa®’s adhesive solution is also available for other rooms in the house.
Be inspired by the variety of designs and order your bathroom accessories from us without drilling!