Additional Info
According to VDA278 analysis tesa® 52215 does not contain any single substances restricted by the drafted GB regulations (China) as well as the indoor concentration guideline by Health, Labour and Welfare Ministry (Japan).
tesa® 52215
150 µm double sided translucent non woven tape for general purpose lamination applications
Product Features
-
- Ultra low total VOC concentration according to VDA 278 analysis
- Very good bonding strength, often also on low surface energy surfaces
- Good converting and die-cutting properties
Product description
tesa® 52215 is a double-sided non-woven tape equipped with a water-based acrylic adhesive. The conformable non-woven tape is especially designed for general purpose lamination applications. The water-based acrylic adhesive of tesa® 52215 is temperature resistant up to 70°C and offers very good bonding strength on various substrates, including materials with low surface energy. Due to its low emission values, it is classified as ultra low VOC and particularly suited to meet interior requirements, e.g. in the automotive industry.
tesa® 52215 is available in efficient laminating lengths and widths as well as in a 100µm version (tesa® 52210).
Product details and specifications
Product Features
- Ultra low total VOC concentration according to VDA 278 analysis
- Very good bonding strength, often also on low surface energy surfaces
- Good converting and die-cutting properties
- High initial tack and peel adhesion
- Highly conformable to follow difficult 3D shapes due to non-woven backing
- Ultra low total VOC concentration according to VDA 278 analysis
Application Fields
- tesa® 52215 is suitable for various types of lamination applications
- Lamination of insulation materials or foam for HVAC (heating, ventilation, and air conditioning) seals
- Bonding of fleece and felt substrates as well as decorative fabrics
- Laminates for NVH (noise, vibration, and harshness) and BSR (buzz, squeak, and rattle) prevention
- Mounting of flooring systems
Product Construction
| Backing material | non-woven |
|---|---|
| Colour | translucent |
| Colour of liner | brown |
| Thickness of liner | 80 µm |
| Total thickness | 150 µm |
| Type of adhesive | water-based acrylic |
| Type of liner | glassine |
| Weight of liner | 90 g/m² |
Product Construction
| Backing material | non-woven |
|---|---|
| Colour | translucent |
| Colour of liner | brown |
| Thickness of liner | 80 µm |
| Total thickness | 150 µm |
| Type of adhesive | water-based acrylic |
| Type of liner | glassine |
| Weight of liner | 90 g/m² |
Properties / Performance Values
| Elongation at break | 5 % |
|---|---|
| Tensile strength | 10 N/cm |
| Suitable for die cutting | yes |
| Tack | good |
| Static shear resistance at 23°C | medium |
| Humidity resistance | good |
| Temperature resistance long term duration | 80 °C |
| Ageing resistance (UV) | very good |
| Temperature resistance short term duration | 190 °C |
| Low VOC | very good |
| Minimum temperature resistance | -40 °C |
Properties / Performance Values
| Elongation at break | 5 % |
|---|---|
| Tensile strength | 10 N/cm |
| Suitable for die cutting | yes |
| Tack | good |
| Static shear resistance at 23°C | medium |
| Humidity resistance | good |
| Temperature resistance long term duration | 80 °C |
| Ageing resistance (UV) | very good |
| Temperature resistance short term duration | 190 °C |
| Low VOC | very good |
| Minimum temperature resistance | -40 °C |
Adhesion to Values
| Adhesion to ABS (initial) | 8.4 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 9.4 N/cm |
| Adhesion to Aluminium (initial) | 6.1 N/cm |
| Adhesion to Aluminium (after 14 days) | 8.1 N/cm |
| Adhesion to PC (initial) | 8.5 N/cm |
| Adhesion to PC (after 14 days) | 9.3 N/cm |
| Adhesion to PE (initial) | 2 N/cm |
| Adhesion to PE (after 14 days) | 5 N/cm |
| Adhesion to PET (initial) | 7.4 N/cm |
| Adhesion to PET (after 14 days) | 9.5 N/cm |
| Adhesion to PP (initial) | 4.6 N/cm |
| Adhesion to PP (after 14 days) | 5.2 N/cm |
| Adhesion to PS (initial) | 5.8 N/cm |
| Adhesion to PS (after 14 days) | 10.1 N/cm |
| Adhesion to PVC (initial) | 6.2 N/cm |
| Adhesion to PVC (after 14 days) | 8.6 N/cm |
| Adhesion to Steel (initial) | 8 N/cm |
| Adhesion to Steel (after 14 days) | 12 N/cm |
Adhesion to Values
| Adhesion to ABS (initial) | 8.4 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 9.4 N/cm |
| Adhesion to Aluminium (initial) | 6.1 N/cm |
| Adhesion to Aluminium (after 14 days) | 8.1 N/cm |
| Adhesion to PC (initial) | 8.5 N/cm |
| Adhesion to PC (after 14 days) | 9.3 N/cm |
| Adhesion to PE (initial) | 2 N/cm |
| Adhesion to PE (after 14 days) | 5 N/cm |
| Adhesion to PET (initial) | 7.4 N/cm |
| Adhesion to PET (after 14 days) | 9.5 N/cm |
| Adhesion to PP (initial) | 4.6 N/cm |
| Adhesion to PP (after 14 days) | 5.2 N/cm |
| Adhesion to PS (initial) | 5.8 N/cm |
| Adhesion to PS (after 14 days) | 10.1 N/cm |
| Adhesion to PVC (initial) | 6.2 N/cm |
| Adhesion to PVC (after 14 days) | 8.6 N/cm |
| Adhesion to Steel (initial) | 8 N/cm |
| Adhesion to Steel (after 14 days) | 12 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
