51571 [Country PI: ek]
[Country PI: ek]
PDF – 44.6 kB
Product description
tesa® 51571 is a double-sided tape with a non-woven backing. It is used for permanent mounting of metal and plastic materials, e.g. aluminium, polystyrene, polypropylene, ABS. The very thick layer of adhesive bonds extremely well on uneven surfaces and has a very high initial bond.
Main applications
tesa® 51571 is used for applications such as:
Mounting of evaporator plates in the production of refrigerators
Technical properties
Backing material
non-woven
Color
translucent
Total thickness
160 µm
Type of adhesive
synthetic rubber
Elongation at break
2 %
Tensile strength
9 N/cm
Type of liner
glassine
Colour of liner
brown
Thickness of liner
70 µm
Weight of liner
78 g/m²
Adhesion properties
Adhesion to ABS (initial)
11.8 N/cm
Adhesion to Aluminium (initial)
13 N/cm
Adhesion to PC (initial)
13.4 N/cm
Adhesion to PE (after 14 days)
8.5 N/cm
Adhesion to PE (initial)
8 N/cm
Adhesion to PET (initial)
10.6 N/cm
Adhesion to PP (after 14 days)
9 N/cm
Adhesion to PP (initial)
9 N/cm
Adhesion to PS (initial)
12.4 N/cm
Adhesion to PVC (after 14 days)
13 N/cm
Adhesion to PVC (initial)
12 N/cm
Adhesion to Steel (after 14 days)
13 N/cm
Adhesion to Steel (covered side, initial)
12.5 N/cm
Adhesion to Steel (initial)
12.5 N/cm
Rating properties
Temperature resistance short term
80 °C
Temperature resistance long term
40 °C
Tack
+
Ageing resistance (UV)
o
Humidity resistance
+
Static shear resistance at 23°C
++
Static shear resistance at 40°C
++
Static shear resistance at 70°C
+
Fogging
++
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
