tesa_4063565115523_66714_00000_LI491_left_pa

tesa® PRO 66714 Mounting Slim

tesa PRO Mounting Slim This extra thin, double-sided adhesive tape is perfect for rapid and lasting indoor attachments. Suitable for tiles, painted wood, venner, most metals, most plastics and glass. The tape has long-term temperature, ageing and humidity resistance. Ideal for various indoor applications.

Product description

tesa PRO Mounting Slim Fix objects that are slimmer than a regular tape without using nails or screws with tesa PRO Mounting Slim. The extra thin, double-sided tape is only 9 mm wide. Achieve a clean mounting job on indoor surfaces with this strong and durable tape. It is suitable for indoor use and holds onto surfaces like tiles, painted wood, veneer, steel (most metals), most plastic and glass. No form of mounting work is quicker or easier than taping. Apply in vertical strips and along the full length of the object or surface. Press down firmly on the mounting tape for at least five seconds.

Application Fields

Easy to apply:
  • In order for the mounting tape to develop its full holding power, the object and surface must be free of dust, dirt and grease.
  • Don't touch the open adhesive surface as it could impair the adhesive strength.
  • Press down firmly on the mounting tape for at least five seconds.
  • For removal, carefully pull the mounting tape parallel from the wall.
  • As the mounting tapes are intended for permanent use, material residues may remain on the object. Try to remove with tesa adhesive remover.

Product Construction

Backing material PE foam
Type of adhesive tackified acrylic
Colour of liner brown
Total thickness 1000 µm
Colour white

Properties / Performance Values

Elongation at break 180 %
Static shear resistance at 23°C good
Humidity resistance very good
Static shear resistance at 40°C good
Temperature resistance long term duration 80 °C
Temperature resistance short term duration 80 °C
Static shear resistance at 70°C very good
Tack good
Tensile strength 10 N/cm
Ageing resistance (UV) very good
Softener resistance medium

Adhesion to Values

Adhesion to Steel (initial) 13.5 N/cm
Adhesion to PE (initial) 0.9 N/cm
Adhesion to PC (after 14 days) 13.5 N/cm
Adhesion to PS (after 14 days) 8 N/cm
Adhesion to ABS (initial) 8 N/cm
Adhesion to PP (after 14 days) 1.2 N/cm
Adhesion to Aluminium (after 14 days) 13.5 N/cm
Adhesion to PET (after 14 days) 13.5 N/cm
Adhesion to PE (after 14 days) 0.9 N/cm
Adhesion to Aluminium (initial) 8 N/cm
Adhesion to ABS (after 14 days) 13.5 N/cm
Adhesion to PC (initial) 8 N/cm
Adhesion to PVC (initial) 13.5 N/cm
Adhesion to PS (initial) 8 N/cm
Adhesion to PET (initial) 6 N/cm
Adhesion to PP (initial) 1.2 N/cm
Adhesion to Steel (after 14 days) 13.5 N/cm
Adhesion to PVC (after 14 days) 13.5 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products