Additional Info
Converted rolls from logrolls must have a minimum width of 50 mm.
tesa® 4216
Low-temperature fineline tape for design painting and surface protection in the automotive paint shop
Product Features
- Residue-free removal on painted and non-painted substrates
- Temperature resistance up to 80°C/60 min
- For wet demasking applications
Product description
tesa® 4216 is a flexible, low-temperature-resistant PE fineline tape with an acrylic adhesive. It is engineered for 2-tone masking applications during OEM paint shop processes with wet demasking. This tape enables precise and fine split lines in visible areas, such as the inner side of the roof frame. To support efficient processing, both standardized and customized applicators are available
Product details and specifications
Product Features
- Residue-free removal on painted and non-painted substrates
- Temperature resistance up to 80°C/60 min
- For wet demasking applications
- Excellent conformability for multidimensional surfaces
Application Fields
Suitable for various types of masking applications, e.g.:
- 2-tone painting with low oven temperatures / wet-demasking in automotive paint shops
- Masking for fine and exact color split lines
- Masking applications in narrow curves and difficult 3D shapes
Product Construction
| Backing material | PE film |
|---|---|
| Total thickness | 105 µm |
| Type of adhesive | acrylic |
Product Construction
| Backing material | PE film |
|---|---|
| Total thickness | 105 µm |
| Type of adhesive | acrylic |
Properties / Performance Values
| Tensile strength | 17.5 N/cm |
|---|---|
| Paint anchorage | no |
| Suitable for die cutting | yes |
| Temperature resistance (60 min) | 80 °C |
| Easy to remove | yes |
| Sharp colour edge | very good |
Properties / Performance Values
| Tensile strength | 17.5 N/cm |
|---|---|
| Paint anchorage | no |
| Suitable for die cutting | yes |
| Temperature resistance (60 min) | 80 °C |
| Easy to remove | yes |
| Sharp colour edge | very good |
Adhesion to Values
| Adhesion to steel | 2.5 N/cm |
|---|
Adhesion to Values
| Adhesion to steel | 2.5 N/cm |
|---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
