tesa® 6957 PV1 Black Matt FPC

High heat resistant, high-speed markable and fraud-resistant

Product Features
  • The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.
  • The adhesive will leave an UV-detectable trace (“UV-Footprint”) on most surfaces as required by GB 25978 (P.R.C.) and NHTSA §541.5 (USA).
Product description

tesa® 6957 is a double layer, brittle acrylic film with watermark. Customised and fraud-resistant information, such as company logo, is permanently embedded in the backing. Marking and cutting are achieved by laser in one step, which makes it possible to realise any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and aging.

The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces. The adhesive will leave an UV-detectable trace (“UV-Footprint”) on most surfaces as required by GB 25978 (P.R.C.) and NHTSA §541.5 (USA).

The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.

Available in: black

Product details and specifications

Product Features

  • The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.
  • The adhesive will leave an UV-detectable trace (“UV-Footprint”) on most surfaces as required by GB 25978 (P.R.C.) and NHTSA §541.5 (USA).

Application Fields

This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
The product is specially designed to fullfil the requirements of F-Type labels (engine and transmission) as defined by GB 25978 (P.R.C.)
Backing material Acrylic
Type of adhesive acrylic
Type of liner coated paper
Weight of liner 120 g/m²
Frost resistance -40 °C
Tamper evidence yes
Ageing resistance (UV) very good
Peel off force from liner 0,5-10
Suitable laser Nd:YAG, Yb:YAG
Chemical resistance very good
Temperature resistance long term duration 150 °C
Temperature resistance short term duration 250 °C
Humidity resistance very good
  • Customised Watermark embedded in the backing
  • Very fast marking is achieved in conjunction with high-speed laser hardware
  • High contrast and excellent marking precision
  • Very resistant to heat, abrasion and chemicals
  • Tamper Evident: Manipulation leaves visible trace + UV footprint
  • Not removable without destruction of the label
  • Flexible formatting and label design: marking and cutting by the laser
  • Efficient: Replaces a multitude of pre-made labels
  • Just-in-time production reduces storage needs

Dimensions: Customer specific
Standard Width: 100mm or 120mm
Standard Length: 200m or 300m

Assortment and Technical Data:
6957 PV3 black/ white glossy: Adhesive 25g/m², Thickness µm without Liner. Colour code: 04
6957 PV1 black/ white glossy: Adhesive 35g/m², Thickness µm without Liner. Colour code: 04
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads

Download the files below for more technical details and information on this product.

Product information_tesa® 6957_en-GB 50 kB
Get in contact with us!

Contact us

Thank you for your message.

We will contact you as soon as possible.

Something went wrong. Please try again later.

Product comparison

Name of product
6957PV1
tesa® 6957 PV1 Black Matt FPC
tesa_06940_black_pr_001_fullsize
tesa® 6940 PV3 Black Glossy FPA
tesa_06930_silver_pr_001_fullsize
tesa® 6940 PV3 silver glossy/ black
tesa_06940_black_pr_001_fullsize
tesa® 6940 PV6 Black Glossy
Two rolls of tesa adhesive tape, one black and one white, displayed on a white background for product presentation. (This text has been generated by AI)
tesa® 6950 PV3 Black Matt FPA
6957PV1
tesa® 6957 PV1 Black Glossy FPA
6957PV1
tesa® 6957 PV3 Black Glossy FPA
6957PV1
tesa® 6957 PV3 Black Glossy FPC
tesa_06925_pr_001_fullsize
tesa® 6925 Black
roll of black tesa adhesive tape with white printed symbols and text on a white background (This text has been generated by AI)
tesa® 6930BK3 PV3 Black
roll of black tesa adhesive tape with white printed symbols and text on a white background (This text has been generated by AI)
tesa® Laser Markable Film 6930BM3 Black Matt / White Text
Type of adhesive
acrylic
acrylic
acrylic
acrylic
acrylic
acrylic
acrylic
acrylic
acrylic
acrylic
acrylic
Backing material
Acrylic
Acrylic
Acrylic film
Acrylic
Acrylic film
Acrylic
Acrylic
Acrylic
Acrylic
Acrylic
Acrylic
Type of adhesive
type: acrylic
type: acrylic
type: acrylic
type: acrylic sustainablecontent: None
type: acrylic
type: acrylic
type: acrylic
type: acrylic
type: acrylic
type: acrylic
type: acrylic
Temperature resistance short term duration
250 °C
250 °C
250 °C
250 °C
250 °C
250 °C
250 °C
250 °C
270 °C
250 °C
250 °C
Temperature resistance long term duration
150 °C
120 °C
120 °C
120 °C
150 °C
150 °C
150 °C
150 °C
120 °C
120 °C
120 °C
Suitable laser
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Yb:YAG
Nd:YAG, Yb:YAG
Nd:YAG, Yb:YAG
Total thickness
122 µm
122 µm
122 µm
122 µm
Last updated on 7 May 2024