Product information

tesa^® 4434

Name: tesa® 4434
Brand: tesa®

Stencil Material for Sandblasting, Protection and Reinforcement

Product description

tesa^® 4434 is a special masking tape that is extremely useful during professional painting processes such as sand blasting and grinding. The extremely tough, resistant, and strong-edged special backing paper also protects sensitive surfaces against becoming contaminated and is sometimes referred to as “elephant hide”. The masking tape is highly adhesive due to its natural-rubber adhesive mass. However, it is easy to remove after application. tesa^® 4434 can resist temperatures of up to 60 °C.

Main features

tesa^® 4434 is ideal for the protection of car parts during professional lacquering work
The flatback paper tape offers perfect adhesion even on difficult surfaces and is suitable for reinforcement of uppers
tesa^® 4434 is also used as stencil material for sandblasting on objects such as tombstones and monuments
The tape can be used as a protective material for grinding in workshops, for base pads, or in other industrial protection works

tesa-4348-flexible-masking-tape-for-indoor-painting-chamois-043480001703-pr

tesa-4432-special-masking-tape-for-sandblasting-chamois-044320000700-pr

tesa-4434-stencil-material-for-sandblasting-protection-01-ap

tesa-4434-stencil-material-for-sandblasting-protection-step1of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step2of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step3of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step4of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step5of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step6of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step7of7-ap

tesa-4434-stencil-material-sandblasting-protection-yellow-044340000400-pr

tesa-4348-flexible-masking-tape-for-indoor-painting-chamois-043480001703-pr

tesa-4432-special-masking-tape-for-sandblasting-chamois-044320000700-pr

tesa-4434-stencil-material-for-sandblasting-protection-01-ap

tesa-4434-stencil-material-for-sandblasting-protection-step1of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step2of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step3of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step4of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step5of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step6of7-ap

tesa-4434-stencil-material-for-sandblasting-protection-step7of7-ap

Technical properties

Elongation at break

6 %

Type of adhesive

natural rubber

Tensile strength

180 N/cm

Total thickness

670 µm

Backing material

flat paper

Adhesion to steel

2.7 N/cm

Temperature resistance

100 °C

Rating properties

Sharp colour edge

Suitable for sandblasting

Hand tearability

Plottability

Paint anchorage

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads