Product information

tesa ® 7133

Automotive interior surface protection and masking tape

Product description

tesa ® 7133 is a self-adhesive polypropylene tape with a natural rubber adhesive. With a temperature resistance of up to 120°C, tesa ® 7133 can be used in masking applications with a low- to medium-temperature exposure. The thin 80 µm backing allows the creation of thin paint split lines.

tesa ® 7133 can also be used as a temporary and removable interior surface protection tape without UV resistance. For this application the target substrates are glass surfaces and high energy plastic parts, such as PC or ABS.

Main features:
  • Thin backing with a temperature resistance up to 120°C/1h
  • Non-conformable PP backing for straight line applications
  • Natural adhesive that works on glass and high surface energy plastic parts

Main applications

tesa ® 7133 is suitable for various types of masking and temporary interior surface protection applications.

Example applications are:
  • Straight line masking during multicolor painting at low to medium temperatures
  • Temporary protection against dirt and damage of painted and unpainted plastic parts (ABS, PC, PMMA)

To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.

tesa -7133-interior-surface-protection-and-masking-tape-blue-071330001200-pr

Technical properties

Backing material

PP film

Total thickness

80 µm

Type of adhesive

natural rubber

Adhesion to steel

1.8 N/cm

Elongation at break

30 %

Tensile strength

133 N/cm

Temperature resistance

120 °C

Rating properties

Easy to remove


Paint anchorage


Powerwash resistance


Scratch resistance


Flame retardant


tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products
tesa ® 54657 Low VOC

Precision die cuts for permanent automotive hole covering applications with high temperature resistance

tesa ® 50560 PV0 Bumperfilm

Temporary protection film for unpainted or painted automotive exterior plastic surfaces

tesa ® 4309 Roll Masker Light

Economic overmasking solution for 2-tone paintings with medium oven temperatures

tesa ® 4317

Fine Crepe Paper Masking Tape for Spray Painting

tesa ® 50533 Edge Securing

High adhesion surface protection tape for freshly painted surfaces at zones like edges and corners

tesa ® 51618

PET fleece tape with rubber adhesive

tesa ® 60608 PV2

Premium self-adhesive PET fleece for demanding BSR applications

tesa ® 52210 Ultra Low VOC

100 µm double-sided, water-based, acrylic non-woven tape for demanding lamination applications in automotive interior

tesa ® 50410 Hood Fixation

Single-sided protective tape for mounting textile-based car covers to automotive windshields

tesa ® 51108

High-temperature PET masking film for automotive paint jobs

tesa ® 66022 Ultra Low VOC

220 µm reinforced water-based acrylic adhesive layer with PET scrim for mounting applications in automotive interiors

tesa Professional Surface Protection 100m:250mm
tesa ® 4848 PV1

Transparent surface protection film for large areas in automotive and paint applications

tesa ® 4185 RollMasker

Highly efficient overmasking solution for 2-tone paintings at high temperatures

tesa ® GlossGuard 50560 PV2 GlossGuard

Temporary protection film for sensitive exterior automotive surfaces such as plastic parts made of PMMA

tesa ® 51136 PV0

Overmasking and surface protection film for the protection of various surfaces mainly in the automotive interior