PDF – 38.2 kB
tesa® 54718 Paintable Noise Blocker
Optimum acoustic insulation die cut for permanent automotive hole covering applications with excellent paintability
Product description
tesa® 54718 Paintable Noise Blocker combines a mineral filled polyolefin layer with a premium cloth top layer and a powerful acrylic adhesive. This product is optimized for the automotive industry to securely cover holes that require excellent acoustic insulation in combination with very good sealing properties.Main features
- Excellent acoustic insulation due to high area density of 1.8 kg/m²
- Very good paint anchorage and UBC (PVC) compatibility
- High temperature resistance up to 160°C
- Good sealing properties
- Good resistance to chemicals on cloth side
- Secure adhesion to steel, aluminum, plastics, painted substrates, and reinforced plastic substrates in automotive lightweight constructions, e.g. CFRP
Main applications
tesa® 54718 is suitable for different hole covering applications along the automotive production process.Example applications are:
- After e-coat where a good compatibility to UBC (PVC) and sealant is required, e.g. car body platform, wheel houses, engine compartment
- Before paint shop where good paint compatibility is essential
- At the assembly line for hole covering on all car body areas, e.g. rocker, front/rear floor
To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Additional Info
tesa® 54718 can be supplied as die-cuts in roll or sheets individually to customer specific dimensions.Our application process engineers support with customized equipment and self-designed application tools to enhance productivity.
According to VDA 278 analysis, tesa® 54718 does not contain any single substances restricted by the drafted GB regulations (China) as well as the indoor concentration guideline by JAMA (Japanese Automotive Manufacturers Association and the Japanese Ministry of Health, Labor and Welfare Ministry (MHLW).
Technical properties
Elongation at break
7.5 %
Type of adhesive
modified acrylic
Adhesion to Steel (initial)
4.6 N/cm
Temperature resistance (30 min)
160 °C
Type of liner
glassine
Tensile strength
105 N/cm
Total thickness
1350 µm
Backing material
polyolefin
Puncture Resistance
400 N
Color
gray
Rating properties
Conformability
+
UBC / Paint Compatibility
++
Resistance to chemicals
+
Noise damping
++
Humidity Sealing
+
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
tesa® 54336 Interior Performance Sealer
tesa® 54332 Fireguard
tesa® 54321
tesa® 54338
tesa® 54400
tesa® 54715 Noise Blocker Standard
tesa® 54339 Low VOC
tesa® 54337 PV1 Low VOC
tesa® 54335 Exterior Performance Sealer
tesa® 54657 Low VOC
tesa® 54678
tesa® 54651 Low VOC
tesa® 54717 Noise Blocker Water Resistant