tesa® 54335 PunctureGuard

Sealing Patch for hole covering applications


Product Features
  • This product is optimized for the automotive industry to cover exterior holes that require excellent puncture resistance
  • reliable paint anchorage and perfect sealing in combination with best stone chipping protection even under harsh conditions.

Product description

tesa® 54335 PunctureGuard combines a strong etched PET layer with a thick acrylic adhesive sealer.


Product details and specifications

Product Features

  • This product is optimized for the automotive industry to cover exterior holes that require excellent puncture resistance
  • reliable paint anchorage and perfect sealing in combination with best stone chipping protection even under harsh conditions.

Application Fields

tesa® 54335 PunctureGuard can be applied before and after paint shop along the automotive production process, e.g. in underbody and floor areas, engine compartments and wheel houses.
Main product features:
  • Excellent puncture resistance
  • Stone chipping protection even at lowest temperatures
  • Reliable corrosion protection and sealing against water ingress
  • Good acoustic insulation properties for higher drive comfort
  • Temperature resistance (dimensional stability) up to 160 °C
  • Good UBC (PVC) compatibility and reliable paint anchorage
  • Secure adhesion to steel, aluminum, plastics, painted substrates, and reinforced plastic substrates in automotive lightweight constructions
Our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation and to ensure the highest performance possible.
Puncture resistance acc. tesa® J0PM0232, measured from backing side 24 h after application at room temperature:
Test climate = 23 ± 1 °C/ 50 ± 5 % relative humidity
Substrate = e-coated panel, 0.7 mm thickness and hole diameter of 30 mm
Patch diameter = 50 mm
Pin diameter = 20 mm
Pressurization = 4 kg roll, 5 x back and forth
Test speed = 300 mm/min
tesa® 54335 PunctureGuard is available upon request in customer specific patch dimensions can be delivered according to customer requirements and applications in either roll or sheet form.
Also available as:
  • tesa® PunctureGuard 54335 PV1 in 690 µm
  • tesa® PunctureGuard 54335 PV2 in 1690 µm
We support your individual application process with tesa designed dispensing solutions to ensure a quick and reliable sealing of holes in the car body.
By fitting your robot with the best end arm tooling we enable a smart automation concept in your production site. Ask for our tesa® EfficienSeal dispensing tool to ensure a highly efficient and automated patch application.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads

Download the files below for more technical details and information on this product.

Get in contact with us!

Contact us

How can we help you? How can we get in touch? In accordance to our Privacy Policy your data will only be stored in a manner appropriate to the nature of the request to fulfill your needs.

Thank you for your message

We'll get back to you as soon as possible.

 

Best regards

Your tesa Team

Something went wrong. Please try again later.