Product Construction
| Backing material | aluminium laminated glasscloth |
| Color | silver |
| Total thickness | 1010 µm |
| Type of adhesive | type: modified acrylic |
| Type of liner | type: PE-coated paper |
tesa® 54332 FireGuard
Sealing Patch for hole covering applications
Product Features
- This product is optimized for the automotive industry to cover holes in the battery area that require reliable fire proofness of the passenger compartment and perfect sealing.
Product description
tesa® 54332 FireGuard combines a fire- and heat-resistant aluminum laminated glass cloth layer with a thick acrylic adhesive sealer.
Product details and specifications
Product Features
- This product is optimized for the automotive industry to cover holes in the battery area that require reliable fire proofness of the passenger compartment and perfect sealing.
Application Fields
tesa® 54332 FireGuard can be applied before and after paint shop along the automotive production process, e.g. floor areas directly above the battery housing.
Main product features:
Our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation and to ensure the highest performance possible.
Main product features:
- Fire proofness of car body holes > 5 minutes at 500 °C (open flame)
- Reliable corrosion protection and sealing against water ingress
- Good puncture resistance
- Temperature resistance (dimensional stability) up to 200 °C
- Good UBC (PVC) compatibility and paint anchorage
- Secure adhesion to steel, aluminum, plastics, painted substrates, and reinforced plastic substrates in automotive lightweight constructions
Our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation and to ensure the highest performance possible.
Product Construction
| Backing material | aluminium laminated glasscloth |
| Color | silver |
| Total thickness | 1010 µm |
| Type of adhesive | type: modified acrylic |
| Type of liner | type: PE-coated paper |
Properties / Performance Values
| Puncture resistance | 400 N |
Properties / Performance Values
| Puncture resistance | 400 N |
Adhesion to Values
| Adhesion to Steel | 22 N/cm |
Adhesion to Values
| Adhesion to Steel | 22 N/cm |
Additional Info
The peel adhesion is measured after three days dwell time at room temperature, therefore the acrylic sealer is reinforced with a double sided etched PET film (36 µm) and applied on ASTM steel.
Fireproofing tesa acc. VCS 7511, 17, 3.8 Fire Ingress
Puncture resistance acc. tesa® J0PM0232, measured from backing side 24 h after application at room temperature:
Test climate = 23 ± 1 °C/ 50 ± 5 % relative humidity
Substrate = e-coated panel, 0.7 mm thickness and hole diameter of 30 mm
Patch diameter = 50 mm
Pin diameter = 20 mm
Pressurization = 4 kg roll, 5 x back and forth
Test speed = 300 mm/min
tesa® 54332 FireGuard is available upon request in customer specific patch dimensions can be delivered according to customer requirements and applications in either roll or sheet form.
We support your individual application process with tesa designed dispensing solutions to ensure a quick and reliable sealing of holes in the car body.
By fitting your robot with the best end arm tooling we enable a smart automation concept in your production site. Ask for our tesa® EfficienSeal dispensing tool to ensure a highly efficient and automated patch application.
Fireproofing tesa acc. VCS 7511, 17, 3.8 Fire Ingress
Puncture resistance acc. tesa® J0PM0232, measured from backing side 24 h after application at room temperature:
Test climate = 23 ± 1 °C/ 50 ± 5 % relative humidity
Substrate = e-coated panel, 0.7 mm thickness and hole diameter of 30 mm
Patch diameter = 50 mm
Pin diameter = 20 mm
Pressurization = 4 kg roll, 5 x back and forth
Test speed = 300 mm/min
tesa® 54332 FireGuard is available upon request in customer specific patch dimensions can be delivered according to customer requirements and applications in either roll or sheet form.
We support your individual application process with tesa designed dispensing solutions to ensure a quick and reliable sealing of holes in the car body.
By fitting your robot with the best end arm tooling we enable a smart automation concept in your production site. Ask for our tesa® EfficienSeal dispensing tool to ensure a highly efficient and automated patch application.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
