PDF – 34.3 kB
Product description
tesa® 51571 is a double-sided tape with a non-woven backing. It is used for permanent mounting of metal and plastic materials, e.g. aluminium, polystyrene, polypropylene, ABS. The very thick layer of adhesive bonds extremely well on uneven surfaces and has a very high initial bond.Main applications
tesa® 51571 is used for applications likeMounting of evaporator plates in the production of refrigerators
Technical properties
Elongation at break
2 %
Type of adhesive
synthetic rubber
Type of liner
glassine
Color of liner
brown
Tensile strength
9 N/cm
Weight of liner
78 g/m²
Total thickness
160 µm
Thickness of liner
70 µm
Backing material
non-woven
Color
translucent
Adhesion properties
Adhesion to Steel (initial)
12.5 N/cm
Adhesion to PE (initial)
8 N/cm
Adhesion to ABS (initial)
11.8 N/cm
Adhesion to PP (after 14 days)
9 N/cm
Adhesion to PC (initial)
13.4 N/cm
Adhesion to PVC (initial)
12 N/cm
Adhesion to PE (after 14 days)
8.5 N/cm
Adhesion to PS (initial)
12.4 N/cm
Adhesion to PET (initial)
10.6 N/cm
Adhesion to Aluminium (initial)
13 N/cm
Adhesion to PP (initial)
9 N/cm
Adhesion to Steel (after 14 days)
13 N/cm
Adhesion to Steel (covered side, initial)
12.5 N/cm
Adhesion to PVC (after 14 days)
13 N/cm
Rating properties
Static shear resistance at 23°C
++
Humidity resistance
+
Tack
+
Static shear resistance at 70°C
+
Ageing resistance (UV)
o
Temperature resistance long term
40 °C
Static shear resistance at 40°C
++
Fogging
++
Temperature resistance short term
80 °C
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
