![[Master PI]](/en/files/images/201903/28/4349-master-pi,151261_fixedwidth_1.jpg "4349 [Master PI]")
4349 [Master PI]
[Master PI]
PDF – 43.2 kB
Product description
NOPI® 4349 is a slightly creped general purpose paper tape with a natural rubber adhesive.
Main applications
The product is suitable for general purpose applications: holding, sealing, fixing, light duty packaging etc.
Technical properties
Backing material
slightly-creped paper
Total thickness
110 µm
Type of adhesive
natural rubber
Adhesion to steel
2 N/cm
Adhesion to rough surfaces
0.6 N/cm
Elongation at break
10 %
Tensile strength
33 N/cm
Unwind force (roll width > 9mm)
2.5 N/roll (30 m/min)
Rating properties
Hand tearability
++
Paint anchorage
++
Sharp colour edge
+
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
