PDF – 35.6 kB
Product description
tesa® 62932 foam tape offers an excellent long term adhesive performance for demanding constructive applications where there is a small design gap.tesa® 62932 offers the following benefits:
- Thin foam backing allows to implement a small design gap
- High immediate bonding strength for fast and reliable assembly even at low pressure
- Conformable foam backing compensates for design tolerances or uneven surfaces
- High ultimate adhesive strength for secure bonding performance
- Very good humidity resistance
- Shock absorption during transport and in daily use
Main applications
- Decorative aluminium cover screens on brown goods
- Doorhandles in kitchen furniture
- Moulded decorative profiles for refrigerators or freezers
- Glass and mirror panels
00:00
Technical properties
Elongation at break
270 %
Type of adhesive
tackified acrylic
Tensile strength
8 N/cm
Total thickness
500 µm
Backing material
PE foam
Colour
black/white
Adhesion properties
Adhesion to Steel (initial)
13 N/cm
Adhesion to PE (initial)
1.7 N/cm
Adhesion to PC (after 14 days)
17 N/cm
Adhesion to PS (after 14 days)
17 N/cm
Adhesion to ABS (initial)
14 N/cm
Adhesion to PP (after 14 days)
3.3 N/cm
Adhesion to PET (after 14 days)
17 N/cm
Adhesion to Aluminium (after 14 days)
17 N/cm
Adhesion to PE (after 14 days)
3 N/cm
Adhesion to Aluminium (initial)
13 N/cm
Adhesion to ABS (after 14 days)
17 N/cm
Adhesion to PC (initial)
9 N/cm
Adhesion to PVC (initial)
14.5 N/cm
Adhesion to PS (initial)
10.5 N/cm
Adhesion to PET (initial)
12.5 N/cm
Adhesion to PP (initial)
1.8 N/cm
Adhesion to Steel (after 14 days)
17 N/cm
Adhesion to PVC (after 14 days)
17 N/cm
Rating properties
Static shear resistance at 23°C
+
Resistance to chemicals
+
Humidity resistance
++
Static shear resistance at 40°C
+
Tack
+
Ageing resistance (UV)
+
Temperature resistance long term
80 °C
Temperature resistance short term
80 °C
Softener resistance
o
Additional Info
Liner variants:PV0 brown glassine paper (71 µm)
PV14 white PE-coated paper (122 µm)
PV10 red filmic liner (120 µm)
Peel Adhesion:
- after 14 days: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
