4302 [Country PI: ek]
[Country PI: ek]
PDF – 43.2 kB
Product description
tesa® 4302 is a finely crêped and conformable paper masking tape, especially suitable for the highest requirements of automotive paintwork (water- or solvent based paints) followed by oven-drying.
Paints and even critical filler systems adhere to the backing avoiding any kind of flaking.
tesa® 4302 can be removed from rubber, glass and paint without tearing or leaving adhesive residues even for cold removal after high heat cycles.
Due to its finely crêped structure, this tape guarantees a sharp edged finish.
Technical properties
Backing material
slightly-creped paper
Total thickness
170 µm
Type of adhesive
natural rubber
Adhesion to steel
4 N/cm
Elongation at break
10 %
Tensile strength
46 N/cm
Temperature resistance
160 °C
Rating properties
Hand tearability
++
Easy to remove
yes
Paint anchorage
++
Sharp colour edge
+
Conformability
+
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
