PDF – 36.2 kB
Product description
tesa® 64993 is a white double-sided adhesive tape consisting of a conformable PP-film backing and a tackified acrylic adhesive. With a thickness of 240 µm it is perfectly suitable to mount automotive exterior and interior mirrors with or without heating element onto the base plate.The tackified acrylic adhesive features an high initial and ultimate adhesion strength especially to ABS and ABS/PC and a good temperature resistance. This leads also to an excellent splintering protection performance.
Main features:
- Excellent combination of a high initial tack and adhesion level
- Superior wet-out performance
- High initial adhesion to ABS and ABS/PC
- Excellent gap filling
- Conformable and robust PP-film backing
- Good temperature resistance
- Excellent converting properties, especially with the humidity resistant PE-coated paper liner (PV4)
Main applications
tesa® 64993 is suitable for mounting automotive exterior and interior mirrors.Example applications are:
- Mounting of non-heated automotive exterior and interior mirror onto the base plate
- Mounting of automotive exterior mirror with heating element onto the base plate
To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Additional Info
Liner versionsPV0: white glassine paper liner (84 µm, 100 g/m²)
PV4: white PE coated paper liner (122 µm, 120 g/m²) with humidity resistant feature
This product information applies to PV4
Technical properties
Elongation at break
20 %
Type of adhesive
tackified acrylic
Tensile strength
130 N/cm
Total thickness
240 µm
Backing material
PP film
Color
white
Adhesion properties
Adhesion to Steel (initial)
12 N/cm
Adhesion to PC (after 14 days)
15.5 N/cm
Adhesion to ABS (initial)
12 N/cm
Adhesion to ABS (after 14 days)
13.5 N/cm
Adhesion to PP (after 14 days)
9.5 N/cm
Adhesion to PET (after 14 days)
10.5 N/cm
Adhesion to PC (initial)
14.5 N/cm
Adhesion to PET (initial)
10 N/cm
Adhesion to PP (initial)
8 N/cm
Adhesion to Steel (after 14 days)
12.5 N/cm
Rating properties
Static shear resistance at 23°C
+
Resistance to chemicals
+
Humidity resistance
++
Tack
+
Ageing resistance (UV)
+
Static shear resistance at 40°C
o
Temperature resistance short term
120 °C
Softener resistance
+
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
