![[Master PI]](/en/files/images/201905/28/62852-master-pi,153284_fixedwidth_1.jpg "62852 [Master PI]")
62852 [Master PI]
[Master PI]
PDF – 61.8 kB
Product description
tesa® 62852 is a double-sided adhesive tape consisting of a conformable black PE foam backing and a pure acrylic adhesive. With a thickness of 0.5 mm, it is suitable for mounting small trims and nameplates, especially those with filigree designs.
The black color allows for an almost invisible bond line. Due to the high conformability, the tape ensures a good wet out and secure bonding even on uneven surfaces and compensates for design tolerances.
The pure acrylic adhesive features a very good initial and high ultimate adhesion performance on MSE plastics like ABS, chromed ABS, PC, and PMMA, as well as on MSE clear coats combined with an excellent temperature resistance. The impressive cold shock performance results from the damping properties of the PE foam backing even at temperatures below -40°C. The PE foam backing also provides non-sticky edges resulting in excellent converting properties, e.g. for die cutting.
Additionally, the tape combines high cohesive strength with a comparatively low density contributing positively to a low weight design.
Also available in 0.8 mm, 0.9 mm, and 1.2 mm formats.
Main features:
- High ultimate adhesive strength
- Excellent temperature resistance
- Excellent converting properties, especially for filigree designs
- Conformable foam backing to compensate for design tolerances or uneven surfaces
Main applications
tesa® 62852 is suitable for mounting a wide range of small exterior trims and parts.
Example applications are:
- Emblems
- Nameplates
- Lettering like single letters for classification of car models or engine data
- Locator pin on windscreens
To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Technical properties
Backing material
PE foam
Color
black
Total thickness
510 µm
Type of adhesive
pure acrylic
Elongation at break
400 %
Tensile strength
8 N/cm
Type of liner
glassine
Colour of liner
brown
Thickness of liner
71 µm
Weight of liner
80 g/m²
Adhesion properties
Adhesion to ABS (after 14 days)
13 N/cm
Adhesion to ABS (initial)
6 N/cm
Adhesion to PE (after 14 days)
1.5 N/cm
Adhesion to PE (initial)
1.5 N/cm
Adhesion to Steel (after 14 days)
20 N/cm
Adhesion to Steel (initial)
9.5 N/cm
Rating properties
Temperature resistance short term
100 °C
Temperature resistance long term
90 °C
Static shear resistance at 23°C
++
Static shear resistance at 40°C
++
Static shear resistance at 70°C
++
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
