Product description
tesa® 64958 is a white double sided tape for general mounting with a PE foam backing and a synthetic rubber adhesive.Product benefits:
- Highly conformable PE-foam
- High immediate bonding strength even on rough or uneven surfaces
- High bonding strength at low mounting pressure
- High bonding strength on low surface energy substrates
Main applications
- Construction of POS-displays
- Mounting of indoor signs and posters
- Mounting of shelf edge labelling systems
- Additional dampening and anti-rattle
Technical properties
Elongation at break
200 %
Type of adhesive
synthetic rubber
Type of liner
glassine
Color of liner
yellow
Tensile strength
7 N/cm
Weight of liner
80 g/m²
Total thickness
1050 µm
Thickness of liner
70 µm
Backing material
PE foam
Color
white
Adhesion properties
Adhesion to Steel (initial)
4 N/cm
Adhesion to PE (initial)
4 N/cm
Adhesion to PC (after 14 days)
4 N/cm
Adhesion to PP (after 14 days)
4 N/cm
Adhesion to PET (after 14 days)
4 N/cm
Adhesion to PC (initial)
4 N/cm
Adhesion to PVC (initial)
4 N/cm
Adhesion to PE (after 14 days)
4 N/cm
Adhesion to PET (initial)
4 N/cm
Adhesion to PP (initial)
4 N/cm
Adhesion to Steel (after 14 days)
4 N/cm
Adhesion to PVC (after 14 days)
4 N/cm
Rating properties
Static shear resistance at 23°C
++
Resistance to chemicals
o
Humidity resistance
+
Tack
+
Ageing resistance (UV)
o
Temperature resistance long term
40 °C
Static shear resistance at 40°C
o
Temperature resistance short term
60 °C
Softener resistance
o
Additional Info
Liner variants:- PV0 brown glassine paper (71 µm)
Peel Adhesion:
- immediately: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC, PE
- after 14 days: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC, PP, PE
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Related products
tesa® 4957
tesa® ACXplus 7048 Gray/White
tesa® ACXplus 7054 High Transparency
tesa® ACXplus 7055 High Transparency
tesa® ACXplus 7063 High Adhesion
tesa® ACXplus 7072 High Resistance
tesa® ACXplus 7074 High Resistance
tesa® 62508
tesa® 62510
tesa® 62854
tesa® 62936
tesa® 66108
tesa® 63608
tesa® 51920
tesa® 65611 Removable Cold Performance (Single-Use)