tesa® 63605

500 μm double-sided PE foam tape

  • Thin foam backing for an invisible design gap
  • High ultimate adhesion level for a reliable bonding performance
  • Soft, conformable foam adapting to structured surfaces
  • Fully outdoor suitable: UV, water and ageing resistant
  • Suitable for manual and automatic application processes

Product description

tesa® 63605 is a double-sided PE foam tape for lightweight mounting applications. It consists of a highly conformable PE foam backing and a tackified acrylic adhesive.

Application Fields

  • Mounting of trims and profiles
  • General purpose mounting

Product Construction

Elongation at break 190 %
Type of adhesive tackified acrylic
Type of liner glassine
Tensile strength 9 N/cm
Total thickness 500 µm
Backing material PE foam
Color white

Properties / Performance Values

Static shear resistance at 23°C good
Humidity resistance very good
Tack good
Ageing resistance (UV) very good
Static shear resistance at 40°C good
Temperature resistance long term 80 °C
Softener resistance medium
Temperature resistance short term 80 °C

Adhesion to Values

Adhesion to Steel (initial) 12 N/cm
Adhesion to PE (initial) 0.8 N/cm
Adhesion to PC (after 14 days) 12 N/cm
Adhesion to PS (after 14 days) 12 N/cm
Adhesion to Steel (initial) 12 N/cm
Adhesion to ABS (initial) 7.5 N/cm
Adhesion to ABS (after 14 days) 12 N/cm
Adhesion to PP (after 14 days) 1.1 N/cm
Adhesion to PET (after 14 days) 12 N/cm
Adhesion to Aluminium (after 14 days) 12 N/cm
Adhesion to PC (initial) 7.5 N/cm
Adhesion to PVC (initial) 5 N/cm
Adhesion to PE (after 14 days) 1.1 N/cm
Adhesion to PS (initial) 8 N/cm
Adhesion to PET (initial) 7.5 N/cm
Adhesion to Aluminium (initial) 7 N/cm
Adhesion to PP (initial) 0.8 N/cm
Adhesion to Steel (after 14 days) 12 N/cm
Adhesion to PVC (after 14 days) 12 N/cm

Additional Info

Liner variants:
  • PV20 brown glassine paper / blue tesa logo
  • PV50 transparent PET film
  • PV15 blue PE film

Peel Adhesion:
  • after 14 days: foam splitting on Steel, Aluminium, ABS, PS, PET, PVC
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products