tesa® 62957 Cold Temperature Tape

1000 µm double-sided PE foam tape

Product Features

Excellent initial tack even at low temperatures
Superior cold processible characteristics
Fully outdoor suitable (UV, water and ageing resistant)

All product features

Product description

tesa® 62957 / 62958 is a double sided PE foam tape. The tape is equipped with an acrylic adhesive.
tesa® 62957 / 62958 was designed for customers operating under cold temperatures on construction sites or in unheated production environments. Normally, pressure-sensitive adhesive tapes are facing problems in cold environments due to an insufficient level of tack, which ultimately leads to a significantly lower bonding performance. Where other tape technologies fail, our tesa® 62957 / 62958 shows an impressive performance on a variety of different substrates at very low temperatures.

Product details and specifications

Product Features

Excellent initial tack even at low temperatures
Superior cold processible characteristics
Fully outdoor suitable (UV, water and ageing resistant)
These superior cold processible characteristics are a result of this product’s unique adhesive formulation.

Application Fields

Mounting of reinforcement bars
Mounting of window skirting trims
Bonding of trims and profiles (plastic extrusions)
Mounting of shelf edge labeling systems
Mounting applications requiring sealing, gap filling, noise dampening and shock absorption characteristics

Adhesive Type	acrylic
Backing material	PE foam
Color	white
Total thickness	1000 µm

Adhesive Type	acrylic
Backing material	PE foam
Color	white
Total thickness	1000 µm

Elongation at break	180 %
Tensile strength	10 N/cm
Static shear resistance at 40°C	medium
Ageing resistance (UV)	very good
Temperature resistance long term	60 °C
Tack	very good
Temperature resistance short term	80 °C

Elongation at break	180 %
Tensile strength	10 N/cm
Static shear resistance at 40°C	medium
Ageing resistance (UV)	very good
Temperature resistance long term	60 °C
Tack	very good
Temperature resistance short term	80 °C

Adhesion to Aluminium (initial)	4 N/cm
Adhesion to Aluminium (after 14 days)	13.5 N/cm
Adhesion to PVC (initial)	4 N/cm
Adhesion to PVC (after 14 days)	13.5 N/cm
Adhesion to Steel (initial)	4 N/cm
Adhesion to Steel (after 14 days)	13.5 N/cm

Adhesion to Aluminium (initial)	4 N/cm
Adhesion to Aluminium (after 14 days)	13.5 N/cm
Adhesion to PVC (initial)	4 N/cm
Adhesion to PVC (after 14 days)	13.5 N/cm
Adhesion to Steel (initial)	4 N/cm
Adhesion to Steel (after 14 days)	13.5 N/cm

Liner variants:

PV14 white PE coated paper (122μm)
PV15 blue PE film (100μm)

Certificates:

tesa® 62957/58 is tested according to IFT MO-01/1 : 2007/1; Report No.: 15-002458-PR01. Category 4.3 Temperature Cycle Test. Category 4.4 UV and Humidity Resistance.

Instructions for use:

Temperatures below 0°C can lead to frosted/iced surfaces. Bonding to such surfaces will not enable our product to be used in a safe and permanent way. Therefore, it's of high importance to reduce any surface contamination including ice and frost before bonding.

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Download the files below for more technical details and information on this product.

Product information_tesa® 62957_en 76.9 kB

Contact us

Thank you for your message

We'll get back to you as soon as possible.

Best regards

Your tesa Team

Something went wrong. Please try again later.

Product comparison

Name of product	tesa® 62957 Cold Temperature Tape	tesa® 6308 New Bond	tesa® 6305 New Bond	tesa® 6311 New Bond	tesa® flameXtinct 45001	tesa® 63608	tesa® 63605	tesa® 88623	tesa® 63615	tesa® 55576	tesa® 63610	tesa® 6700 New Bond
Total thickness	1000 µm	800 µm	500 µm	1100 µm	1000 µm	800 µm	500 µm	1000 µm	1500 µm	1200 µm	1000 µm	400 µm
Adhesive Type	acrylic	LSE	LSE	LSE	FR acrylic	tackified acrylic	tackified acrylic	tackified acrylic	tackified acrylic	acrylic	tackified acrylic	pure acrylic
Backing material	PE foam	Acrylic foam	Acrylic foam	Acrylic foam	FR PE foam	PE foam	PE foam	PE foam	PE foam	PE foam	PE foam	foamed acrylic
Color	white	gray	gray	gray	white	black/white	black/white	white	black/white	white	black/white	gray
Adhesion to Steel (initial)	4 N/cm	28 N/cm	26 N/cm	30 N/cm	19.2 N/cm	11 N/cm	12 N/cm	22 N/cm	12 N/cm	5.5 N/cm	11 N/cm	14 N/cm
Adhesion to Steel (after 14 days)	13.5 N/cm				22 N/cm	11 N/cm	12 N/cm		12 N/cm		11 N/cm
Adhesion to PVC (initial)	4 N/cm					5 N/cm	5 N/cm	13 N/cm	6 N/cm	3 N/cm	6 N/cm