PDF – 35.7 kB
Product description
tesa® 62530 is a double sided PE foam tape for general mounting applications. It consists of a highly conformable closed cell PE foam backing and a tackified acrylic adhesive.Product benefits:
- Good adhesion on strongly structured surfaces
- Versatile adhesive for high immediate adhesion on numerous substrates
- Fully outdoor suitable: UV, water and ageing resistant
- High immediate adhesion even at low bonding pressure
- Very good cold shock absorption
Main applications
- Window skirting trims
- Muntin bars
- Dust and moisture seals
- Decorative elements on doors
Additional Info
Liner variants:- PV0 brown glassine paper (71 µm)
- PV10 red transparent PP film (120 µm)
Peel Adhesion:
- Immediate: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC
- After 14 days: foam splitting on Steel, Aluminium, ABS, PC, PS, PET, PVC, PE, PP
Longterm dampening properties and temperature resistance have been certified by ift institute, Germany (Report no. 13-003011-PR02)
Technical properties
Elongation at break
160 %
Type of adhesive
tackified acrylic
Tensile strength
13.3 N/cm
Total thickness
3000 µm
Backing material
PE foam
Color
black/white
Adhesion properties
Adhesion to Steel (initial)
6 N/cm
Adhesion to PE (initial)
2 N/cm
Adhesion to PC (after 14 days)
6 N/cm
Adhesion to PS (after 14 days)
6 N/cm
Adhesion to ABS (initial)
6 N/cm
Adhesion to ABS (after 14 days)
6 N/cm
Adhesion to PP (after 14 days)
6 N/cm
Adhesion to PET (after 14 days)
6 N/cm
Adhesion to Aluminium (after 14 days)
6 N/cm
Adhesion to PC (initial)
6 N/cm
Adhesion to PVC (initial)
6 N/cm
Adhesion to PE (after 14 days)
2 N/cm
Adhesion to PS (initial)
6 N/cm
Adhesion to PET (initial)
6 N/cm
Adhesion to Aluminium (initial)
6 N/cm
Adhesion to PP (initial)
6 N/cm
Adhesion to Steel (after 14 days)
6 N/cm
Adhesion to PVC (after 14 days)
6 N/cm
Rating properties
Static shear resistance at 23°C
+
Resistance to chemicals
++
Humidity resistance
++
Tack
+
Ageing resistance (UV)
+
Temperature resistance long term
80 °C
Static shear resistance at 40°C
+
Temperature resistance short term
80 °C
Softener resistance
o
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
