PDF – 36.2 kB
Product description
tesa® 62508 is a double sided PE foam tape for mounting applications. It consists of a highly conformable PE foam backing and a tackified acrylic adhesive.Product benefits:
- High ultimate adhesion level for a reliable bonding performance
- Fully outdoor suitable: UV, water and ageing resistant
- Conformable PE foam core with high inner strength
- Suitable for automatic and manual module assembly
- Easy solar module assembly due to a high foam compression rate
Main applications
- Solar module frames
- Mounting of trims and profiles
- General mounting applications
Additional Info
Liner variants:- PV0 brown glassine paper (71 µm)
- PV13 transparent PET film (50 µm)
- PV15 blue PE film (100 µm)
Peel Adhesion:
- immediately: foam splitting on steel
- after 14 days: foam splitting on steel, ABS, Aluminium, PC, PET, PS, PVC
tesa® 62508 is recognized by UL as photovoltaic polymeric material (QIHE2).
tesa® 62508 has been tested by TÜV Rheinland, Germany. The test confirms the longterm adhesion performance after IEC 61215 climate tests and a 85°C temperature resistance.
The temperature resistance (short/long) of tesa® 62508 has been approved according to tesa test method under static load.
Technical properties
Elongation at break
190 %
Type of adhesive
tackified acrylic
Tensile strength
9.5 N/cm
Total thickness
800 µm
Backing material
PE foam
Color
black/white
Adhesion properties
Adhesion to Steel (initial)
13.5 N/cm
Adhesion to PE (initial)
0.9 N/cm
Adhesion to PC (after 14 days)
13.5 N/cm
Adhesion to ABS (initial)
8 N/cm
Adhesion to ABS (after 14 days)
13.5 N/cm
Adhesion to PET (after 14 days)
13.5 N/cm
Adhesion to Aluminium (after 14 days)
13.5 N/cm
Adhesion to PC (initial)
8 N/cm
Adhesion to PVC (initial)
8 N/cm
Adhesion to PE (after 14 days)
0.9 N/cm
Adhesion to PET (initial)
6 N/cm
Adhesion to Aluminium (initial)
8 N/cm
Adhesion to PP (initial)
1.2 N/cm
Adhesion to Steel (after 14 days)
13.5 N/cm
Adhesion to PVC (after 14 days)
13.5 N/cm
Adhesion to PP (covered side, after 14 days)
1.2 N/cm
Rating properties
Static shear resistance at 23°C
+
Humidity resistance
++
Tack
+
Ageing resistance (UV)
++
Temperature resistance long term
80 °C
Static shear resistance at 40°C
+
Temperature resistance short term
80 °C
Softener resistance
o
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
tesa® 64958
tesa® ACXplus 7078 High Resistance
tesa® 66720
tesa® ACXplus 7811 Black Line
tesa® ACXplus 7076 High Resistance
tesa® 4928
tesa® 63630
tesa® 51571
tesa® 66828
tesa® 50118 PV0 Ultra Low VOC
tesa® 65611 Removable Cold Performance (Single-Use)
tesa® 62852
tesa® 66022 Ultra Low VOC
tesa® 60606 PV1
tesa® 51920