Share this page
More privacy
Currently no data is transferred to social networks. This happens first when you click on the referring icon. Then a pop-up window opens. Only then, and not before, a data connection will be built up.
tesa® 62505
500 µm double sided PE foam tape
- Thin foam backing for an invisible design gap
- High ultimate adhesion level for a reliable bonding performance
- Soft, conformable foam adapting to structured surfaces
- Fully outdoor suitable: UV, water and ageing resistant
- Suitable for manual and automatic application processes
Product description
tesa® 62505 is a double sided PE foam tape for lightweight mounting applications. It consists of a highly conformable PE foam backing and a tackified acrylic adhesive.
Application Fields
Mounting of decorative trims and profiles
1 / 4
2 / 4
3 / 4
4 / 4
Product Construction
| Elongation at break | 150 % |
| Backing material | PE foam |
| Type of adhesive | tackified acrylic |
| Tensile strength | 5 N/cm |
| Total thickness | 500 µm |
| Color | black/white |
Properties / Performance Values
| Temperature resistance long term | 80 °C |
| Temperature resistance short term | 80 °C |
Adhesion to Values
| Adhesion to Steel (initial) | 8.5 N/cm |
| Adhesion to PE (initial) | 0.9 N/cm |
| Adhesion to PC (after 14 days) | 9.5 N/cm |
| Adhesion to ABS (initial) | 3 N/cm |
| Adhesion to PP (after 14 days) | 1.2 N/cm |
| Adhesion to PET (after 14 days) | 9.5 N/cm |
| Adhesion to Aluminium (after 14 days) | 9.5 N/cm |
| Adhesion to PE (after 14 days) | 1.2 N/cm |
| Adhesion to Aluminium (initial) | 5 N/cm |
| Adhesion to Steel (initial) | 8.5 N/cm |
| Adhesion to ABS (after 14 days) | 9.5 N/cm |
| Adhesion to PC (initial) | 5 N/cm |
| Adhesion to PVC (initial) | 2 N/cm |
| Adhesion to PET (initial) | 3 N/cm |
| Adhesion to PP (initial) | 0.9 N/cm |
| Adhesion to Steel (after 14 days) | 9.5 N/cm |
| Adhesion to PVC (after 14 days) | 9.5 N/cm |
Additional Info
Liner variants:
Peel Adhesion:
- PV0 brown glassine paper (71 µm)
- PV6 red transparent PP film (80 µm)
Peel Adhesion:
- after 14 days: foam splitting on Steel, Aluminium, ABS, PS, PET, PVC
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
