Additional Info
The adhesion data is tested according to ASTM D3330
tesa® 60916
160μm double sided non-woven tape
Product Features
- Very good temperature resistance performance
- Good bonding strength and shear resistance
- High conformability for uneven surfaces
Product description
tesa® 60916 is a 160μm double sided white translucent non-woven tape consisting of a non-woven backing and a tackified acrylic adhesive.
Product details and specifications
Product Features
- Very good temperature resistance performance
- Good bonding strength and shear resistance
- High conformability for uneven surfaces
- Good converting properties
Application Fields
- Mounting and assembly of components into electronic devices
- Permanent paper and film mounting where high peel adhesion level is needed
Product Construction
| Adhesive Type | tackified acrylic |
|---|---|
| Backing material | non-woven |
| Color | translucent |
| Color of liner | white/red logo |
| Liner Type | PE-coated paper |
| Total thickness | 160 µm |
Product Construction
| Adhesive Type | tackified acrylic |
|---|---|
| Backing material | non-woven |
| Color | translucent |
| Color of liner | white/red logo |
| Liner Type | PE-coated paper |
| Total thickness | 160 µm |
Properties / Performance Values
| Temperature resistance short term | 160 °C |
|---|---|
| Static shear resistance at 70°C | very good |
| Static shear resistance at 23°C | very good |
| Tack | very good |
| Temperature resistance long term | 80 °C |
Properties / Performance Values
| Temperature resistance short term | 160 °C |
|---|---|
| Static shear resistance at 70°C | very good |
| Static shear resistance at 23°C | very good |
| Tack | very good |
| Temperature resistance long term | 80 °C |
Adhesion to Values
| Adhesion to PC (initial) | 8.7 N/cm |
|---|---|
| Adhesion to PC (after 3 days) | 9.5 N/cm |
| Adhesion to PI (initial) | 9.1 N/cm |
| Adhesion to PI (after 3 days) | 9.1 N/cm |
| Adhesion to Steel (initial) | 8.1 N/cm |
| Adhesion to Steel (after 3 days) | 9.2 N/cm |
Adhesion to Values
| Adhesion to PC (initial) | 8.7 N/cm |
|---|---|
| Adhesion to PC (after 3 days) | 9.5 N/cm |
| Adhesion to PI (initial) | 9.1 N/cm |
| Adhesion to PI (after 3 days) | 9.1 N/cm |
| Adhesion to Steel (initial) | 8.1 N/cm |
| Adhesion to Steel (after 3 days) | 9.2 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
