![[Master PI]](/en/files/images/201812/21/60248-master-pi,152993_fixedwidth_1.jpg "60248 [Master PI]")
60248 [Master PI]
[Master PI]
PDF – 43.7 kB
Product description
tesa® 60248 is a grey single sided electrically conductive self adhesive foam tape. It consist of a perforated foam with electrically conductive coating and an electrically conductive adhesive.
tesa® 60248 features especially:
- Thickness: 500µm
- Excellent electrical conductivity in XYZ-direction even at high temperatures and humidity
- High adhesion level even at harsh environmental conditions
- Very good shock absorbing and cushioning properties
- High stability of the foam to avoid flaking of particles
Main applications
- EMI shielding and grounding applications
- Electrostatic discharge applications
Technical properties
Backing material
conductive foam
Color
gray
Total thickness
500 µm
Type of adhesive
conductive acrylic
Adhesion to Steel (initial)
4.8 N/cm
Adhesion to Steel (after 14 days)
6.3 N/cm
Type of liner
PE-coated paper
Colour of liner
white/blue logo
Thickness of liner
120 µm
Release of liner
easy
Temperature resistance short term
160 °C
Contact resistance z-direction (initial)
0.03 Ohm / square inch
Surface resistance x-y-direction
0.2 Ohm / square
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
