Product information

tesa^® 60238

Product description

tesa^® 60238 is a matte black single sided xyz conductive EMI shielding tape.
It consists of matte black electrically conductive copper backing which is coated with electrically conductive acrylic adhesive. Designed for EMI shielding and ESD grounding for display and other components applications.

tesa^® 60238 features especially:

Excellent EMI shielding performance
Excellent electrical conductivity in XYZ-direction for very good grounding performance
High adhesion level even at harsh environmental conditions avoids edge lifting
Outstanding heat spreading performance
Matte black surface (low gloss) with anti-finger print and solvent resistant characteristic

Main applications

Edge wrapping for display
Matte black covering over components for shielding and ESD grounding
Light management on display
Heat management on various components

Technical properties

Backing material

black-coated copper

Color

matte black

Total thickness

45 µm

Type of adhesive

conductive acrylic

Adhesion to Steel (initial)

5.5 N/cm

Adhesion to Steel (after 14 days)

7 N/cm

Type of liner

PET

Colour of liner

transparent

Thickness of liner

50 µm

Temperature resistance short term

200 °C

Contact resistance z-direction (initial)

0.05 Ohm / square inch

Surface resistance x-y-direction (adhesive)

0.2 Ohm / square

Surface resistance x-y-direction (backing)

0.4 Ohm / square

Rating properties

Static shear resistance at 23°C

Static shear resistance at 40°C

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads