Product information

tesa ® 51136 PV0

Overmasking and surface protection film for the protection of various surfaces mainly in the automotive interior

Product description

tesa ® 51136 PV0 is a 105 µm self-adhesive polyethylene tape with an acrylic adhesive for masking large areas of plastic parts during professional automotive painting processes. The color of the tape provides a good contrast to dark surfaces making positioning easier and faster.

Furthermore, tesa ® 51136 PV0 is an interior surface protection tape for slightly structured surfaces. It is a higher adhesion version for rough surfaces and carpets.

Main features:
  • Green translucent film
  • Good adhesion and traceless removal
  • Versatile with regards to use on surfaces like PP, ABS, and textile
  • Cost saving due to reduction in rectification and final repair
  • No special equipment needed, ensuring simple, low cost application and removal processes
  • Easy disposal. Both film and adhesive system are environmentally friendly

Main applications

tesa ® 51136 PV0 is used for masking large areas of plastic parts during professional automotive painting processes and for the protection of various surfaces in automotive interiors made of plastic or textiles against dirt and damage during storage, assembly, and transportation.

tesa -51136-pv0-overmasking-and-surface-protection-film-green-511360003400-pr

Technical properties

Backing material

PE film

Total thickness

105 µm

Type of adhesive


Adhesion to steel

2.4 N/cm

Elongation at break

300 %

Tensile strength

19 N/cm

Temperature resistance

100 °C

Rating properties

Easy to remove


Paint anchorage


Powerwash resistance


Scratch resistance


Flame retardant


tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products
tesa ® 54338

Precision die cuts for permanent interior automotive hole covering applications with easy quality control

tesa ® 51014

215 μm double-sided non-woven tape with tackified acrylic adhesive and a differential adhesion level suitable for a wide range of rough materials

tesa ® 52210 Ultra Low VOC

100 µm double-sided, water-based, acrylic non-woven tape for demanding lamination applications in automotive interior

tesa ® 92108 HiP – High initial Performance

0.8 mm double-sided foam tape for LSE surfaces: plastic to plastic application in automotive interior

tesa ® 4287

Tensilized Strapping Tape

tesa ® 4962

Premium double-sided non-woven tape

tesa ® 66824

tesa ® 52994

Permanent Protection against abrasion, corrosion and stone-chipping

tesa ® 51618

PET fleece tape with rubber adhesive

tesa ® 60606 PV1

Premium self-adhesive PET fleece for demanding BSR applications

tesa ® 52105 Ultra Low VOC

50 µm double-sided, transparent, water-based acrylic transfer tape for lamination applications in automotive interior

tesa ® Wheel Rim Protection 50551 PV1

Transparent surface protection tape

tesa ® GlossGuard 50560 PV2 GlossGuard

Temporary protection film for sensitive exterior automotive surfaces such as plastic parts made of PMMA

tesa ® 66013 Ultra Low VOC

130 µm reinforced water-based acrylic adhesive layer with PET scrim for mounting applications in automotive interiors

tesa ® 51136 PV2

Surface protection film for the protection of various surfaces mainly in the automotive interior