tesa_4063565116285_66965-00002_LI493_left_pa

tesa® PRO 66965 Mounting Transparent

Attach flat objects both in indoor and outdoor spaces such as glass, tiles, finished wood and many types of plastic. The crystal clear and extra thin tape is resistant to many common damages such as UV-light and to temperatures up to 100°C. A single 10 cm strip can hold up to 2 kg.

  • Strong and durable: temperature-resistant up to 100°C in the long term, resistant to damage caused by moisture, (certain) chemicals, softening agents and UV-light
  • Works almost invisible: the transparent tape adheres to smooth surfaces like glass, tiles, wood and various types of plastics
  • Ideal for interior and exterior use: Strong double-sided adhesive tape for secure fixing of flat objects such as signs, thermometers and more
  • Easy to use: The mounting tape can be cut into individual small or large pieces for an adhesive strip in the optimized size

Product description

Attach flat objects both in indoor and outdoor spaces: Use on surfaces, such as glass, tiles, finished wood and many types of plastic. The crystal clear and extra thin tape can resist temperatures up to 100°C. It is resistant to damage caused by moisture, (certain) chemicals, softening agents and UV-light. A single 10 cm strip can hold up to 2 kg. It's the perfect solution for mounting items on transparent and solid surfaces. Apply in vertical strips and along the full length of the object or surface. Press down firmly on the mounting tape for at least five seconds.

Application Fields

Easy to apply:
  • In order for the mounting tape to develop its full holding power, the object and surface must be free of dust, dirt and grease
  • Attach to the rougher surface first
  • Apply in vertical strips and along the full length of the object or surface.
  • Press down firmly for at least five seconds
  • For removal, carefully pull the mounting tape parallel from the wall. As the mounting tapes are intended for permanent use, material residues may remain on the object. Try to remove with tesa adhesive remover.

Product Construction

Elongation at break 50 %
Backing material PET film
Type of adhesive tackified acrylic
Color of liner red
Tensile strength 20 N/cm
Total thickness 205 µm
Color transparent

Properties / Performance Values

Temperature resistance long term 100 °C
Temperature resistance short term 200 °C

Adhesion to Values

Adhesion to Steel (initial) 11.5 N/cm
Adhesion to PE (initial) 5.8 N/cm
Adhesion to PC (after 14 days) 14 N/cm
Adhesion to PS (after 14 days) 12 N/cm
Adhesion to ABS (initial) 10.3 N/cm
Adhesion to PP (after 14 days) 7.9 N/cm
Adhesion to Aluminium (after 14 days) 10.6 N/cm
Adhesion to PET (after 14 days) 9.5 N/cm
Adhesion to PE (after 14 days) 6.9 N/cm
Adhesion to Aluminium (initial) 9.2 N/cm
Adhesion to Steel (initial) 11.5 N/cm
Adhesion to ABS (after 14 days) 12 N/cm
Adhesion to PC (initial) 12.6 N/cm
Adhesion to PVC (initial) 8.7 N/cm
Adhesion to PS (initial) 10.6 N/cm
Adhesion to PET (initial) 9.2 N/cm
Adhesion to PP (initial) 6.8 N/cm
Adhesion to Steel (after 14 days) 11.8 N/cm
Adhesion to PVC (after 14 days) 13 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products