tesa® PRO 66957 Mounting PE-fixation

tesa PRO Mounting PE-fixation - Strong and durable tape - Secure mounting - Ideal for indoor and outdoor use - Suitable for multiple application

Product description

tesa PRO Mounting PE-fixation Get high immediate adhesion jobs on numerous substrates with tesa PRO Mounting PE-fixation. Suitable for POS-, exhibition sample displays, shelf edge labels, cable channels, window bars and window skirting trims, decorative glass or mirror elements in indoor spaces. holds objects in place even at low bonding pressure. Thanks to its extra length, never run out of tape again! The strong double-sided adhesive tape is UV-, water and ageing resistant. Easy to apply: Make sure the surface is dust and dirt-free. Press firmly for five seconds.

Application Fields

Easy to apply:
  • In order for the mounting tape to develop its full holding power, the object and surface must be free of dust, dirt and grease
  • Don't touch the open adhesive surface as it could impair the adhesive strength
  • Press firmly for five seconds
  • For removal, carefully pull the mounting tape parallel from the wall
  • As the mounting tapes are intended for permanent use, material residues may remain on the object. Try to remove with tesa adhesive remover

Product Construction

Backing material PE foam
Type of adhesive tackified acrylic
Type of liner glassine
Total thickness 1100 µm
Color white
Color of liner brown

Properties / Performance Values

Elongation at break 200 %
Tensile strength 6 N/cm
Ageing resistance (UV) good
Chemical resistance good
Humidity resistance very good
Softener resistance medium
Static shear resistance at 23°C good
Static shear resistance at 40°C good
Tack good
Temperature resistance long term 80 °C
Temperature resistance short term 80 °C

Adhesion to Values

Adhesion to ABS (initial) 4 N/cm
Adhesion to ABS (after 14 days) 4 N/cm
Adhesion to Aluminium (initial) 4 N/cm
Adhesion to Aluminium (after 14 days) 4 N/cm
Adhesion to PC (initial) 4 N/cm
Adhesion to PC (after 14 days) 4 N/cm
Adhesion to PE (initial) 1.7 N/cm
Adhesion to PE (after 14 days) 2.2 N/cm
Adhesion to PET (initial) 4 N/cm
Adhesion to PET (after 14 days) 4 N/cm
Adhesion to PP (initial) 1.8 N/cm
Adhesion to PP (after 14 days) 3.3 N/cm
Adhesion to PS (initial) 4 N/cm
Adhesion to PS (after 14 days) 4 N/cm
Adhesion to PVC (initial) 4 N/cm
Adhesion to PVC (after 14 days) 4 N/cm
Adhesion to Steel (initial) 4 N/cm
Adhesion to Steel (after 14 days) 4 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products