Additional Info
- Recommended curing dosage: 3000mJ per cm² (UVA 365nm) on adhesive surface.
- Also possible to cure with 405nm LED.
100µm optically clear transfer tape
tesa® 69304 is a highly transparent transfer tape produced under controlled clean room conditions and designed for optical clear lamination. It is a UV-curable tape which can be cured under UVA and UVV (<410nm) wavelength.
Backing material | none |
---|---|
Colour | transparent |
Colour of liner | transparent |
Thickness of liner (easy release) | 50 µm |
Thickness of liner (tight release) | 75 µm |
Thickness of tape | 100 µm |
Type of adhesive | acrylic |
Type of liner | PET |
Backing material | none |
---|---|
Colour | transparent |
Colour of liner | transparent |
Thickness of liner (easy release) | 50 µm |
Thickness of liner (tight release) | 75 µm |
Thickness of tape | 100 µm |
Type of adhesive | acrylic |
Type of liner | PET |
Haze < | 0.5 % |
---|---|
Dielectric constant | 5.74 |
Transmittance (380 - 780nm) > | 99 % |
Humidity resistance | very good |
Release of liner - outside | tight |
Gap filling | 40 % |
Release of liner - inside | easy |
Refractive index | 1.47 |
WVTR (38°C, 90%RH) | 710 g/sqm*d |
Ageing resistance (UV) | very good |
Haze < | 0.5 % |
---|---|
Dielectric constant | 5.74 |
Transmittance (380 - 780nm) > | 99 % |
Humidity resistance | very good |
Release of liner - outside | tight |
Gap filling | 40 % |
Release of liner - inside | easy |
Refractive index | 1.47 |
WVTR (38°C, 90%RH) | 710 g/sqm*d |
Ageing resistance (UV) | very good |
Adhesion to Glass (initial) | 8 N/cm |
---|---|
Adhesion to Glass (after UV curing) | 11.8 N/cm |
Adhesion to PC (after UV curing) | 14.1 N/cm |
Adhesion to PET (after UV curing) | 4.6 N/cm |
Adhesion to PMMA (after UV curing) | 6.1 N/cm |
Adhesion to Polarizer (after UV curing) | 8.5 N/cm |
Adhesion to Glass (initial) | 8 N/cm |
---|---|
Adhesion to Glass (after UV curing) | 11.8 N/cm |
Adhesion to PC (after UV curing) | 14.1 N/cm |
Adhesion to PET (after UV curing) | 4.6 N/cm |
Adhesion to PMMA (after UV curing) | 6.1 N/cm |
Adhesion to Polarizer (after UV curing) | 8.5 N/cm |
Download the files below for more technical details and information on this product.