Contact us
tesa® 61395
Product Construction
| Type of adhesive | tackified acrylic |
| Type of liner | glassine |
| Colour of liner | white with tesa logo |
| Weight of liner | 80 g/m² |
| Total thickness | 200 µm |
| Thickness of liner | 71 µm |
| Backing material | PET film |
| Colour | black |
Properties / Performance Values
| Elongation at break | 50 % |
| Static shear resistance at 23°C | good |
| Humidity resistance | very good |
| Tack | medium |
| Tensile strength | 20 N/cm |
| Ageing resistance (UV) | very good |
| Static shear resistance at 40°C | good |
| Temperature resistance long term duration | 100 °C |
| Temperature resistance short term duration | 200 °C |
Adhesion to Values
| Adhesion to Steel (initial) | 14.3 N/cm |
| Adhesion to PC (after 14 days) | 19.5 N/cm |
| Adhesion to PMMA (after 14 days) | 19.2 N/cm |
| Adhesion to ABS (initial) | 10 N/cm |
| Adhesion to ABS (after 14 days) | 13.3 N/cm |
| Adhesion to PC (initial) | 11.6 N/cm |
| Adhesion to Glass (after 14 days) | 16.6 N/cm |
| Adhesion to Glass (initial) | 14.3 N/cm |
| Adhesion to PMMA (initial) | 14.2 N/cm |
| Adhesion to Steel (after 14 days) | 17 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
