tesa® GlossGuard 50560 PV2 GlossGuard DISCONTINUED
Temporary protection film for sensitive exterior automotive surfaces such as plastic parts made of PMMA
Product Features
- Cost saving due to reduction in rectification and final repair
- Preserves the plastic finish, up to 12 months’ storage outdoors
- Good adhesion to the range of plastic surfaces
Product description
tesa® 50560 PV2 GlossGuard is a premium grade self-adhesive film that has been developed for the protection of sensitive automotive plastic surfaces, e.g. B-pillar covers made of high gloss plastic such as PMMA, SAN, ABS, or similar.
Product details and specifications
Product Features
- Cost saving due to reduction in rectification and final repair
- Preserves the plastic finish, up to 12 months’ storage outdoors
- Good adhesion to the range of plastic surfaces
- No special equipment needed, ensuring simple, low-cost application and removal processes
- Easy disposal. Both film and adhesive system are environmentally friendly
- Due to good UV resistance and perfect paint compatibility tesa® 50560 PV2 GlossGuard is a reliable way to protect unpainted plastic components during the transportation process.
Application Fields
tesa® 50560 PV2 GlossGuard is suitable for the protection of painted automotive plastic parts made of PMMA, like B-pillar covers, against dirt and scratches during assembly, transport, and storage.
Product Construction
Backing material | polyolefinic film |
---|---|
Total thickness | 52 µm |
Type of adhesive | PIB |
Product Construction
Backing material | polyolefinic film |
---|---|
Total thickness | 52 µm |
Type of adhesive | PIB |
Properties / Performance Values
Elongation at break | 450 % |
---|---|
Tensile strength | 22 N/cm |
Easy to remove | yes |
UV-resistance | 52 week/s |
Chemical resistance | very good |
Suitable for die cutting | yes |
Properties / Performance Values
Elongation at break | 450 % |
---|---|
Tensile strength | 22 N/cm |
Easy to remove | yes |
UV-resistance | 52 week/s |
Chemical resistance | very good |
Suitable for die cutting | yes |
Adhesion to Values
Adhesion to steel | 1.5 N/cm |
---|
Adhesion to Values
Adhesion to steel | 1.5 N/cm |
---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
