![[Master PI]](/en/files/images/201904/21/68582-master-pi,153596_fixedwidth_1.jpg "68582 [Master PI]")
68582 [Master PI]
[Master PI]
PDF – 45.1 kB
Product description
tesa® 68582 is a transparent, double-sided self-adhesive tape consisting of a PET backing and a tackified acrylic adhesive.
The coating weight of the open side is higher than the coating weight of the covered side.
tesa® 68582 features esp.
- Thickness: 50µm
- High adhesion level on the open side, low adhesion level on the covered side
- Excellent resistance to demanding environmental conditions
- Very good handling performance in converting processes
Main applications
- Mounting of two different sub-strates, where one is easy to adhere and the other one is difficult to adhere
Technical properties
Backing material
PET film
Color
transparent
Total thickness
50 µm
Type of adhesive
tackified acrylic
Elongation at break
50 %
Tensile strength
20 N/cm
Type of liner
PE-coated paper
Colour of liner
white/blue logo
Thickness of liner
122 µm
Weight of liner
120 g/m²
Adhesion properties
Adhesion to ABS (after 14 days)
7.9 N/cm
Adhesion to ABS (covered side, after 14 days)
6.6 N/cm
Adhesion to ABS (covered side, initial)
4.2 N/cm
Adhesion to ABS (initial)
6.5 N/cm
Adhesion to PC (after 14 days)
9.7 N/cm
Adhesion to PC (covered side, after 14 days)
7.2 N/cm
Adhesion to PC (covered side, initial)
5.4 N/cm
Adhesion to PC (initial)
8.2 N/cm
Adhesion to PE (after 14 days)
4.7 N/cm
Adhesion to PE (covered side, after 14 days)
2.6 N/cm
Adhesion to PE (covered side, initial)
1.6 N/cm
Adhesion to PE (initial)
3.6 N/cm
Adhesion to PET (after 14 days)
7 N/cm
Adhesion to PET (covered side, after 14 days)
5.6 N/cm
Adhesion to PET (covered side, initial)
4.4 N/cm
Adhesion to PET (initial)
6.5 N/cm
Adhesion to Steel (after 14 days)
9.2 N/cm
Adhesion to Steel (covered side, after 14 days)
7.5 N/cm
Adhesion to Steel (covered side, initial)
5 N/cm
Adhesion to Steel (initial)
8 N/cm
Rating properties
Temperature resistance short term
200 °C
Temperature resistance long term
100 °C
Tack
o
Ageing resistance (UV)
++
Humidity resistance
++
Resistance to chemicals
++
Static shear resistance at 23°C
+
Static shear resistance at 40°C
o
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
