Additional Info
Liner variants:
PV57: Double sided PET liners (36µm easy-release inside / 50µm tight-release outside)
PV57: Double sided PET liners (36µm easy-release inside / 50µm tight-release outside)
tesa® 68548
10µm double sided transparent conformable filmic tape
Product Features
- Thickness: 10µm
- Backing thickness: 2µm
- Excellent heat transfer due to low thickness and good wetting
Product description
tesa® 68548 is a transparent, double-sided self-adhesive tape consisting of a thin, conformable PET film backing and a tackified acrylic adhesive.
Product details and specifications
Product Features
- Thickness: 10µm
- Backing thickness: 2µm
- Excellent heat transfer due to low thickness and good wetting
- High adhesion level relative to low thickness
- Excellent conformability and adjustment to curved surfaces
- Excellent resistance to demanding environmental conditions
Application Fields
- Mounting of heat spreading parts
- Lamination in NFC antenna
- Very small design gap filling
Product Construction
| Adhesive Type | tackified acrylic |
|---|---|
| Backing material | PET film |
| Color | transparent |
| Total thickness | 10 µm |
Product Construction
| Adhesive Type | tackified acrylic |
|---|---|
| Backing material | PET film |
| Color | transparent |
| Total thickness | 10 µm |
Properties / Performance Values
| Temperature resistance short term | 200 °C |
|---|---|
| Humidity resistance | very good |
| Ageing resistance (UV) | very good |
| Temperature resistance long term | 100 °C |
| Static shear resistance at 40°C | good |
| Chemical Resistance | good |
| Tack | low |
| Static shear resistance at 23°C | good |
Properties / Performance Values
| Temperature resistance short term | 200 °C |
|---|---|
| Humidity resistance | very good |
| Ageing resistance (UV) | very good |
| Temperature resistance long term | 100 °C |
| Static shear resistance at 40°C | good |
| Chemical Resistance | good |
| Tack | low |
| Static shear resistance at 23°C | good |
Adhesion to Values
| Adhesion to ABS (initial) | 5.5 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 5.7 N/cm |
| Adhesion to PC (initial) | 6.5 N/cm |
| Adhesion to PC (after 14 days) | 6.8 N/cm |
| Adhesion to Steel (initial) | 5.9 N/cm |
| Adhesion to Steel (after 14 days) | 7.3 N/cm |
Adhesion to Values
| Adhesion to ABS (initial) | 5.5 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 5.7 N/cm |
| Adhesion to PC (initial) | 6.5 N/cm |
| Adhesion to PC (after 14 days) | 6.8 N/cm |
| Adhesion to Steel (initial) | 5.9 N/cm |
| Adhesion to Steel (after 14 days) | 7.3 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
