tesa_PET-trans_dr_WZ_001

tesa® 68503

30µm double-sided transparent filmic tape

  • Thickness: 30μm
  • Good adhesion level
  • Very smooth appearance
  • Excellent resistance to demanding environmental conditions
  • Excellent handling performance in converting processes
  • Double PET liner (36µm easy-release inside / 50µm tight-release outside)

Product description

tesa® 68503 is a transparent, double-sided self-adhesive tape consisting of a PET backing, a tackified acrylic adhesive and double PET liner.
Due to the very smooth and excellent appearance it is the perfect solution for display applications.

Application Fields

  • Force touch film bonding
  • FPC and PCB mounting
  • LED light bar fixation
  • Reflector and optical sheet fixation

Product Construction

Type of adhesive tackified acrylic
Thickness of liner - inside 36 µm
Type of liner PET film
Thickness of liner - outside 50 µm
Total thickness 30 µm
Backing material PET film
Color transparent
Type of liner - inside PET

Properties / Performance Values

Type of liner - outside PET
Temperature resistance long term 100 °C
Temperature resistance short term 200 °C

Adhesion to Values

Adhesion to PMMA (covered side, after 14 days) 8.4 N/cm
Adhesion to PI (initial) 7.9 N/cm
Adhesion to PC (covered side, initial) 8 N/cm
Adhesion to PET (covered side, after 14 days) 6.4 N/cm
Adhesion to Steel (initial) 7.2 N/cm
Adhesion to PE (initial) 4.2 N/cm
Adhesion to PC (after 14 days) 8.9 N/cm
Adhesion to Steel (initial) 7.2 N/cm
Adhesion to PMMA (after 14 days) 8.2 N/cm
Adhesion to PI (covered side, after 14 days) 8.2 N/cm
Adhesion to PE (covered side, after 14 days) 4.7 N/cm
Adhesion to PET (after 14 days) 6.6 N/cm
Adhesion to PC (initial) 8.5 N/cm
Adhesion to PMMA (covered side, initial) 8.3 N/cm
Adhesion to PE (covered side, initial) 4.2 N/cm
Adhesion to Steel (covered side, after 14 days) 8.3 N/cm
Adhesion to PET (covered side, initial) 6.3 N/cm
Adhesion to PE (after 14 days) 4.7 N/cm
Adhesion to PI (after 14 days) 8 N/cm
Adhesion to PET (initial) 6.2 N/cm
Adhesion to PI (covered side, initial) 7.9 N/cm
Adhesion to PMMA (initial) 8.2 N/cm
Adhesion to PC (covered side, after 14 days) 8.5 N/cm
Adhesion to Steel (after 14 days) 8.1 N/cm
Adhesion to Steel (covered side, initial) 7.7 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products