Product information

tesa ® 60606 PV1

Premium self-adhesive PET fleece for demanding BSR applications

Product description

tesa ® 60606 PV1 is a thick, black PET fleece with high adhesive power and high conformability even on LSE surfaces. The product is optimized for vibration and rattling noise damping in the automotive industry.

  • Low VOC
  • Good noise damping properties
  • High initial tack and peel adhesion on a wide variety of interior surfaces
  • Smooth and conformable design following 3D shapes
  • Excellent repulsion resistance
  • Good aging resistance
  • Abrasion resistance
  • Self extinguishing (tested as composite with non-inflammable material)

Main applications

  • Noise prevention
  • Vibration absorbance
  • Application on rough and curved surfaces or demanding bonding conditions
  • Bridging and cushioning small gaps

tesa _60606_pr_001

Technical properties

Backing material

PET fleece



Total thickness

760 µm

Type of adhesive

tackified acrylic

Elongation at break

85 %

Tensile strength

55 N/cm

Type of liner


Colour of liner

brown/blue logo

Adhesion properties

Adhesion to PE (initial)

3.6 N/cm

Rating properties

Suitable for die cutting


Abrasion resistance


Energy absorption




Noise damping


tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products
tesa HAF® 8405

30µm amber reactive HAF mounting tape

tesa ® 52215 Ultra Low VOC

150 µm double-sided, water-based, acrylic non-woven tape for very demanding lamination applications in automotive interior

tesa ® 66007 Ultra Low VOC

75µm reinforced water-based acrylic adhesive layer with PET scrim for mounting applications in automotive interiors

tesa ® ACXplus 7076 High Resistance

1,500 µm double-sided acrylic foam tape

tesa ® 51623

PET non-woven tape with solvent-free rubber adhesive

tesa ® ACXplus 7808 Black Line

0.8 mm double-sided acrylic foam tape for mounting automotive exterior trims and parts

tesa triple A® 51037

Hand-tearable PET cloth tape for high abrasion protection of automotive harnesses

tesa ® 51608

PET fleece tape for flexibility and noise damping

tesa ® 52110 Ultra Low VOC

100 µm double-sided, transparent, water-based acrylic transfer tape for demanding lamination applications in automotive interior

tesa ® 62508

800µm double sided PE foam tape

tesa ® 50550 Glassguard

Temporary protection film for sensitive surfaces such as automotive glass

tesa ® 52105 Ultra Low VOC

50 µm double-sided, transparent, water-based acrylic transfer tape for lamination applications in automotive interior

tesa ® 51132

Surface protection film for the protection of various surfaces mainly in automotive interiors

tesa ® ACXplus 7815 Black Line

1.5 mm double-sided acrylic foam tape for mounting automotive exterior trims and parts

tesa ® 62510

1000 µm double sided PE foam tape