PDF – 29.7 kB
Mounting of very thin photopolymer plates on compressible sleeves
Product descriptiontesa® 52307 is especially designed for plate mounting of very thin photopolymer plates (e.g. 0.76 mm / 0.03” or 1.14 mm / 0.045") on compressible sleeves in flexographic printing.
It is a double-sided tape with highly differentiated adhesion levels on its two sides.
While the sleeve side adhesive ensures a secure bond to the sleeve, the plate side adhesive is especially tailored for the bond to very thin photopolymer plates. The bond is high enough to secure the plate for a stable printing process, while at the same time allowing for easy removal of the plate without any plate damage.
The specially developed liner provides an ideal solution for tape handling also when applying across very wide sleeves.
Solvent resistance of the tape ensures easy and efficient processes.
All of our products for plate mounting on compressible sleeves feature very thin film backings to not interfere with the compressible characteristics of the sleeve.
Main applicationsPlate mounting of very thin photopolymer plates (e.g. 0.76 mm / 0.03” or 1.14 mm / 0.045") on compressible sleeves in flexographic printing.
Type of adhesive
Type of liner
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.