Additional Info
- Standard widths: 19, 25, 38 mm
- Standard length: 90 m
- Standard core diameter: 76 mm
- Max. outer diameter: 220 mm
- Further dimensions only available upon request
PET fleece tape for automated taping
tesa® 51623 AT01 is a tape for wire harness covering that is majorly applied in the passenger compartment. It combines important features such as noise damping and bundling strength while keeping harnesses flexible supporting an easy assembly process at the OEM. tesa® 51623 AT01 is specifically designed for semi-automated taping. Through its higher roll length, this product allows reduced setup times and higher efficiency in the production of wire harnesses.
Adhesive Type | rubber based |
---|---|
Backing material | PET fleece |
Total thickness | 250 µm |
Adhesive Type | rubber based |
---|---|
Backing material | PET fleece |
Total thickness | 250 µm |
Elongation at break | 20 % |
---|---|
Tensile strength | 45 N/cm |
Abrasion resistance (5mm mandrel, LV312) | Class A |
Temperature resistance max. | 105 °C |
Hand tearability | yes |
Temperature resistance min. | -40 °C |
Abrasion resistance (10mm mandrel, LV312) | Class B |
Unwind force (roll width > 9mm) | 10 N/roll (30 m/min) |
Noise damping (LV312) | Class C |
Elongation at break | 20 % |
---|---|
Tensile strength | 45 N/cm |
Abrasion resistance (5mm mandrel, LV312) | Class A |
Temperature resistance max. | 105 °C |
Hand tearability | yes |
Temperature resistance min. | -40 °C |
Abrasion resistance (10mm mandrel, LV312) | Class B |
Unwind force (roll width > 9mm) | 10 N/roll (30 m/min) |
Noise damping (LV312) | Class C |
Adhesion to Steel | 2 N/cm |
---|
Adhesion to Steel | 2 N/cm |
---|
Download the files below for more technical details and information on this product.