tesa® 4101 PV2

Adhesive film of hydrate cellulose for packaging

  • The backing, which is composed of a sustainable material, is characterized by a high rigidity and low electrostatic charging.
  • Long strips of the tape can be dispensed without any curling effect is possible.
  • Hydrate cellulose film can be cleanly cut (separated) by an subjacent tesa® tear strip.
  • The tape can easily be torn by hand.

Product description

tesa® 4101 PV 2 is based on a hydrate cellulose film coated with a rubber adhesive.

Application Fields

tesa® 4101 PV 2 is mainly used for general packaging purposes, such as sealing of small boxes. The tape can be easily applied with tesa® desk dispensers.

Product Construction

Elongation at break 25 %
Type of adhesive synthetic rubber
Tensile strength 42 N/cm
Total thickness 51 µm
Backing material hydrate cellulose

Adhesion to Values

Adhesion to steel 6 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products