Removable d/s PET-cloth, differential rubber based adhesive system

Product Features
  • Temporary floor laying during fairs, exhibitions, conventions & renovations

Product Construction

Backing material cloth
Color white
Color of liner brown
Total thickness 235 µm
Type of adhesive type: synthetic rubber
Type of liner type: glassine

Properties / Performance Values

Elongation at break 25 %
Tensile strength 38 N/cm
Static shear resistance at 70°C medium, good
Humidity resistance good
Static shear resistance at 40°C good, medium
Fogging very good
Chemical resistance good
Tack very good
Temperature resistance short term 80 °C
Ageing resistance (UV) medium
Temperature resistance long term 40 °C

Adhesion to Values

Adhesion to PE (initial) 2.5 N/cm
Adhesion to PE (after 14 days) 2 N/cm
Adhesion to PE (covered side, initial) 4.5 N/cm
Adhesion to PE (covered side, after 14 days) 5 N/cm
Adhesion to PP (initial) 4.5 N/cm
Adhesion to PP (after 14 days) 2.5 N/cm
Adhesion to PP (covered side, after 14 days) 5 N/cm
Adhesion to PP (covered side, initial) 6.5 N/cm
Adhesion to Steel (initial) 7.5 N/cm
Adhesion to Steel (after 14 days) 5.5 N/cm
Adhesion to Steel (covered side, after 14 days) 8 N/cm
Adhesion to Steel (covered side, initial) 9 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.